PISO-ENCODER300

PISO-ENCODER/300/600 has a 3-axis or 6-axis encoder counter. Each axis has a 32-bit, true counter with maximum counting rate of 1MHz. The Index reset resets by using a C+/C- channel, which will reset every revolution. The hardware reset resets by an external pin (HR1 ~ HR6). The HR1 ~ HR6 also can be a digital input. 8-channel digital outputs are also provided. 2500Vrms photo couplers isolate the digital I/O. This board provides DOS, windows 95 and windows NT drivers.


The counting mode has 3 types of selections:

1. QUADRANT mode,
2. CW_CCW mode
3. PULSE_DIR mode.

3 kinds of counter reset modes are provided:

1. Register Reset
2. Index Reset
3. Hardware Reset.

• PCI bus
• 3-axis Encoder counter
• True 32 bits counter
• Maximum counting rate: 1MHz.
• Third-order internal digital filter.
• Counting mode: Quadrant, CW_CCW, PULSE_DIR
• A+, A-, B+, B-, C+, C- inputs.
• Programmable reset counter function.
• Index (C channel) reset counter function.
• Hardware reset (HR1 ~ HR6), reset counter function
• SCSI-II 68-pin connector.