NS-209FC

$559.00

Unmanaged 8-Port Industrial 10/100 Base-T to 100 Base-FX Fiber Optics Converter. Supports operating temperatures from -10 ~ +70°C

Availability: IN STOCK | FASTEST DELIVERY : Saturday, Sep 26 | Enter ZIP below for shipping options

Share On:
Categories:	Switches and Converters with Plastic Cases \| Industrial Ring Ethernet/Fiber Switch
Review:	Write your review
Resources:	Data Sheet CE Certification FCC Certification

Introduction

The NS-209FC (SC Connector; Multi-mode) is a Unmanaged 8-Port Industrial Ethernet(10/100Base-TX) to Fiber Optics(100Base-FX) converter that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It is used Ethernet for transmitting a signal up to 2 Km(6,600 ft), and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.

The NS-209FC operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125μm fiber cables; in half duplex mode, range is 412m with 62.5/ 125μm fiber cables.

The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.

Features

Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
3.2 Gbps high performance memory bandwidth
Integrated look-up engine with dedicated 1 K unicast MAC addresses.
Supports +10~+30Vdc voltage
Supports operating temperatures from -10 ~ +70°C
DIN rail mount for industrial usage

Specifications

EMS Protection
ESD (IEC 61000-4-2)	± 4 kV Contact

LED Indicators
Status	Power, Link/Act, 10/100M, Full duplex/Half duplex (Fiber Port)

Ethernet
Ports	8 x RJ-45, 10/100 Base-TX
Standards	IEEE 802.3, 802.3u, 802.3x
Processing Type	Store & forward; wire speed switching
MAC Table	2048
Memory Bandwidth	2.0 Gbps
Frame Buffer Memory	512 Kbit
Flow Control	IEEE 802.3x flow control, back pressure flow control
Isolation	1500 Vrms 1 minute

Fiber
Ports	1 x 100 Base-FX, SC connector
Mode	Multi-Mode
Fiber Cable	50/125, 62.5/125 or 100/140 m
Distance	2 km, (62.5/125 m recommended) for full duplex
Wavelength	1300 or 1310 nm
TX Output	-20 dBm Min. -14 dBm Max.
RX Sensitivity	-32 dBm

Power
Reverse Polarity Protection	Yes
Input Range	+12 ~ +48 VDC
Consumption	0.26 A @ 24 VDC

Mechanical
Casing	Plastic
Dimensions (mm)	64 x 118 x 101 (W x L x H)
Installation	DIN-Rail Mounting

Environment
Operating Temperature	-10 °C ~ +75 °C
Storage Temperature	-20 °C ~ +85 °C
Humidity	10% ~ 90% RH, non-condensing

Add a review

Your email address will not be published. Required fields are marked *

Overall ratings

Select Rating *

You must be signed in to review! Click here to sign in.