| Share On: | |
|---|---|
| Categories: | M-7000 Modbus RTU Remote Data Acquisition Modules | M-7000 Modbus RTU Remote Data Acquisition Modules |
| Review: | Write your review |
| Resources: |
The M-7018Z is a 10-channel voltage and current thermocouple input data acquisition module. It is communicable over Modbus RTU and RS-485 with High Over Voltage Protection. Supports operating temperatures between -25 to 75°C (-13F ~ 167F). M-7018Z comes with a DB-1820 Daugther Board that supports Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA software and PLCs.
| Analog Input | |
| Input Channels | 10 Differential |
| Input Type | +/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V +/-20mA, 0~20mA, 4~20mA (Requires Optional External 125 Ohm Resistor) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710) |
| Resolution | 16-bit |
| Sampling Rate | 10 Samples/Sec (Total) |
| Accuracy | +/- 0.1 % |
| -3dB BandWidth | 15.7 Hz |
| Zero Drift | +/- 0.5 V/°C |
| Span Drift | +/- 25 ppm/°C |
| Common Mode Rejection | 150 dB |
| Normal Mode Rejection | 100 dB |
| Input Impedance | >500k Ohms |
| Over voltage Protection | 240 Vrms |
| Open Thermocouple Detection | Yes |
| Individual Channel Configuration | Yes |
| Intra-module Isolation, Field to Logic | 3000 VDC |
| Interface | |
| Interface | RS-485 |
| Format | N, 8, 1 |
| Baud Rate | 1200 ~ 115200 bps |
| DB-1820 (3.81mm pitch) | |
| Wire Strip Length | 4 ~ 5 mm |
| Wire Range | 16 ~ 24 AWG |
| DN-1822 (5.08mm ptich) | |
| Wire Strip Length | 4 ~ 5 mm |
| Wire Range | 14 ~ 24 AWG |
| LED Display | |
| 1 LED as Power/Communication Indicator | |
| Power | |
| Input | +10 ~ +30 VDC |
| Power Consumption | 1.0W |
| Protocol | |
| Support Modbus and DCON Protocol | Yes |
| Environment | |
| Operating Temperature | -25 ~ 75 °C |
| Storage Temperature | -40 ~ 85 °C |
| Humidity | 5 ~ 95% RH, Non-condensing |
| Type | Range°C |
| J | -210 ~ +760 |
| K | -270 ~ +1372 |
| T | -270 ~ +400 |
| E | -270 ~ +1000 |
| R | 0 ~ +1768 |
| S | 0 ~ +1768 |
| B | 0 ~ +1820 |
| N | -270 ~ 1300 |
| C | 0 ~ 2320 |
| L | -200 ~ +800 |
| M | -200 ~ +100 |
| L (DIN43710) | -200 ~ +900 |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
Quick Start
Wire Diagram
Development software & drivers
Add a review
Your email address will not be published. Required fields are marked *