| Share On: | |
|---|---|
| Categories: | Lighting Control |
| Review: | Write your review |
| Resources: |
ICP DAS USA’s LC-223 is an easy-to-use dimming ballast control module that can be easily installed and operated with no programming skill required. Users can easily control the brightness of a fluorescent lamp using a dimmer, either via digital input or a host controller. The digital input can control the light value of the luminous flux in sequence from 10% to 100%, without the need for a remote host controller. 4 kV ESD protection and 2500 VDC intra-module isolation are also provided. When needed, uLC-223 can be a programmable based Modbus RTU protocol, allowing different addresses being set via hardware configuration.
| Isolation | |
|---|---|
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ±4 kV for Power |
| ESD (IEC 61000-4-2) | ±4 kV contact for each Terminal ±4 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±2 kV for Power |
| LED Indicators | |
|---|---|
| Status | 1 LED as Power Indicator |
| Analog Output | |
|---|---|
| Channels | 1 |
| Type | 0 ~ 20 mA, 4 ~ 20 mA, 0 ~ 10 V, 1 ~ 10 V |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| DA Output Response Time | 10 ms |
| Voltage Output Capability | 20 mA |
| Current Load Resistance | 450 |
| Digital Input | |
|---|---|
| Channels | Dry Contact: 2 for the Dimming Trigger Wet Contact: 1 for the Wall Switch Control |
| Type | Dry + Wet Contact |
| ON Voltage Level | Wet: 65 VAC ~ 240 VAC Dry: Close to GND |
| OFF Voltage Level | Wet: 58 VAC Max. Dry: Open |
| Relay Output | |
|---|---|
| Channels | 1 |
| Type | Power Relay, Form A (SPST N.O.) |
| Contact Rating | 16 A (Res. load) (1).250 VAC (Recommend Working Current 1.5 A) |
| Operate Time | 10 ms Max. |
| Release Time | 5 ms Max. |
| Electrical Endurance | 120,000 ops. |
| Mechanical Endurance | 5,000,000 ops. |
| Power on Value | Yes, programmable |
| Safe Value | Yes, programmable |
| Application Specification | (1).Incandescent Lamp: 40W/220VAC 8 Sets (2).LED (Electronic ballast): 40W/220VAC 10 Sets |
| COM Ports | |
|---|---|
| Ports | 1 x RS-485 |
| Baud Rate | 1200 ~ 115200 bps |
| Data Format | (N, 8, 1) |
| Protocol | DCON, Modbus RTU |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Consumption | 1.5 W Max. |
| Powered from Terminal Block | Yes, 10 ~ 30 VDC |
| Mechanical | |
|---|---|
| Dimensions (mm) | 72 x 100 x 59 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
Quick Start
Add a review
Your email address will not be published. Required fields are marked *