| Share On: | |
|---|---|
| Categories: | New Products | I-9000 Remote I/O modules |
| Review: | Write your review |
| Resources: |
The I-8094F and I-9094F are 4-axis stepping/pulse-type servo motor control modules that can be used on the programmable automation controller (PAC) series provided by ICP DAS, and are suitable for general-purpose motion applications. The I-8094F/ I-9094F have the full functions of the I-8094/I-9094 with the addition of an FRnet port, which allows the fast remote I/O of the module to be expanded easily. This two-wired FRnet can automatically scan its 128 DI and 128 DO channels within a period of 2.88 ms. In addition to their wide speed range, these intelligent motion controllers also have a variety of motion control functions built in, such as 2/3-axis linear interpolation, 2-axis circular interpolation, T/S-curve acceleration/deceleration, numerous synchronous actions, automatic homing, and others.
A major advantage is that the majority of the I-8094F/I-9094F motion control functions are performed by the high-performance motion ASIC with little load on the processor. While driving the motors, the motion status, and the status of the other I/O channels on the PAC modules, can still be monitored. As the CPU loading requirements of the I-8094F/I-9094F is minimal, one or more motion modules may be used with a single PAC controller. ICP DAS also provides a wide range of functions and examples that can be used to reduce the need for additional programming, making it a highly cost-effective solution for motion control application developers.
|
Software
|
|
|
Development
|
Visual C++ lib/DLL |
| C#, VB.Net DLL | |
| Visual Basic 6.0 | |
|
Utility
|
EzGo Utility |
|
Hardware
|
|
|
Connector
|
68-pin SCSI-II connector |
|
General
|
|
|
No. of Axes
|
4 |
|
Operation Mode
|
Semi-closed Loop |
|
Synchronous Action
|
10 activation factors and 14 actions |
|
Speed Profile
|
T/S-curve |
|
Position Control Mode
|
Incremental mode and absolute mode |
|
Command Type
|
Pulse Command |
|
Auto-Home Search
|
Yes |
|
Input Signal Filter
|
2 ~ 16 ms, 8 stages |
|
Axis I/O
|
|
|
Servo Interface Output
|
SVON |
|
Manual Pulse Generator
|
Yes |
|
Mechanical Switch Input
|
Home, LMT+/-, NHOME, EMG |
|
Position Compare Output
|
10 KHz (X and Y only) |
|
Servo Interface Input
|
INP, ALM |
|
Encoder Input
|
|
|
Ring Counter Mode
|
32-bit |
|
Mode
|
A/B Phase, Up/Down |
|
Counting Rate
|
4 MHz (Max.) |
|
Counter Width
|
32-bit |
|
Pulse Output
|
|
|
Mode
|
CW/CCW, PULSE/DIR |
|
Counter Width
|
32-bit |
|
Rate
|
4 MHz (Max.) |
|
Interpolation
|
|
|
Circular
|
Any 2 axes |
|
Continuous
|
Yes |
|
Linear
|
Any 2 to 3 of 4 axes |
|
Digital Input
|
|
|
Channels
|
Expandable : 128 DI |
|
Isolation
|
2500 Vrms optical isolation |
|
Digital Output
|
|
|
Channels
|
Expandable : 128 DO |
|
Isolation
|
2500 Vrms optical isolation |
|
Power
|
|
|
Consumption
|
+5 V @ 500 mA |
|
Environmental
|
|
|
Operating Temperature
|
-20 ~ +75°C |
|
Storage Temperature
|
-30 ~ +85°C |
|
Humidity
|
5 ~ 90% RH, non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *