| Share On: | |
|---|---|
| Categories: | I-8000 Ladder Logic PLC Controllers | I-8000 Rack Mount Controllers |
| Review: | Write your review |
| Resources: |
*** The I-8437 has been phased out and replaced by the I-8437-80 which has a faster processor ***
The I-8xx7 family of ISaGRAF controllers offers a powerful and modular solution, for PLC consumers. The I-8xx7 takes full advantage of ICS Triplex’s ISaGRAF IEC-61131 compatible software, to deliver the ultimate in flexible and easy to use program development. The I-8xx7 is an excellent solution for users looking to implement a powerful localized, Ethernet based, rack mounted control / data acquisition solution. I-8xx7 features include:
Power Supply |
|
Protection |
Power reverse polarity protection |
Input Range |
10 ~ 30 VDC |
Power Consumption |
20 W (when I/O slots are empty |
Environment |
|
Operating Temerature |
-25°C ~ +75°C (-13°F ~ +167°F) |
| Storage Temperature | -30°C ~ +80°C (-22°F ~ +176°F) |
Humidity |
5 ~ 90% (non-condensing) |
System |
|
CPU |
80188, 40 MHz, or compatible |
Watchdog Timer |
Yes |
RTC (RTC) |
Provide second, minute, hour, date, day of week, month, year |
SRAM |
512 KB |
FLASH Memory |
512 KB, Erase unit is 64K byes, 100,000 erase/write cycles |
| NVRAM | 31 bytes, battery backup, data valid up to 10 years |
| EEPROM | 2048 bytes, retention > 100 years. 1,000,000 erase/write cycles |
| SMMI | 5-Digit, 7-Seg. LED, four push buttons & three LED on the front panel. It can display message, value, simulate input & output |
| I/O Slots | 4 empty slots for I-8417, 8 empty slots for I-8817. Accept parallel & serial I/O boards |
NET ID |
8-pin DIP switch to set NET ID as 1 ~ 255 |
Serial Ports |
|
COM 1 |
RS-232: TxD, RxD, GND, Speed: 115,200 bps max. Programs download port |
COM 2 |
RS-485: D+, D-, 115,200 bps max. Self-tuner ASIC inside, Programs download port |
COM 3 |
Can be configured as RS-232 or RS0485, Speed: 115,200 bps max. RS-232: TxD, RxD, RTS, CTS, GND, RS-485: Data+, Data- |
COM 4 |
RS-232: Full moderm signals, 115,200 bps max. TxD, RxD, RTS, CTS, DSR, DTR, CD, RI, GND |
Development Software |
|
ISaGRAF Version 3 |
IEC61131-3 standard. Language: LD, ST, FBD, SFC, IL & FC |
Max. Code Size |
I-8417/8817 accepts max. 64 KB ISaGRAF code size (Appli. x8m must < 64 KB) |
Motion |
|
Motion Control |
Can integrate with one I-8091 (2-axis) or two I-8091 (4-axis) to do motion control. (Please update to motion driver to support it.) |
PWM Output |
|
Pusle Width Modulation Output |
8-ch max. for one controller. 500 Hz max. for Off=1 & On=1 ms, Output square wave: Off: 1 ~ 32767 ms, On: 1 ~ 32767 ms, Optional DO boards: I-8037, 8041, 8042, 8054, 8055, 8056, 8057, 8060, 8063, 8064, 8065, 8066, 8068, 8069. (Relay Output boards cannot generate fast square wave) |
Counters |
|
Parallel DI Counter |
8-ch. max. for 1 controller. Counter value: 32-bit, 500Hz max. Min. pusle width > 1 ms Optional DI boards: I-8040, 8042, 8051, 8052, 8053, 8054, 8055, 8058, 8063, 8077 |
Serial DI Counter |
Counter input: 100 Hz max. Counter value: - to 65,535 (16 bit). Optional serial I-87K D/I boards: I-87K D/I boards: I-87051, 87052, 87053, 87054, 87055, 87058, 87063 |
Remote DI Counter |
All remote I-7000 & I-87K DI modules support counters. 100 Hz max. value: 0 to 65,5535 |
High Speed Counter |
I-87082: 100 kHz max. 32 bit; I-8080: 450 kHz max. 32 bit |
Protocol |
|
| Modbus Slave Protocol | COM1 & COM2 default supoort Modbus RTU Slave protocol for connecting ISaGRAF, PC/HMI/OPC Server & MMI panels. |
| Modbus Master Protocol | Up to 2 COM ports (COM1, 3, 4, or COM5 if multi-serial port boards are plugged) support Modbus master protocol to connect to other Modbus slave devices |
| Remote I/O | One of COM3 or COM4 supports I-7000 I/O modules & (I-87K base + I-87K serial I/O boards or RU-87P1/2/4/8 + I-87K High Profile I/O cards) as Remote I/O. Max 64 Remote I/O modules for one controller. |
| Fbus | Built-in COM3 Port to exchange data between ICP DAS USA's ISaGRAF PACs |
SMS: Short Message Service |
One of COM4 of COM5 can link to a GSM modem to support SMS. User can request data/controller by cellular phone. The controller can also send data & alarms to user's cellular phone. Optional GSM modems: GTM-201-RS-232 (850/900/1800/1900 GSM/GPRS External Modem). |
User-defined Protocol |
Can write custom made protocols applied at COM1, 3, 4 (& COM5 ~ 10 if multi-serial port boards are plugged) by serial commuincation function blocks |
| Modem Link | Supports PC remotely download & monitor the controller through a normal modem |
| MMICON / LCD | One of COM3 or COM4 supports ICP DAS USA's MMICON. The MMICON is featured with a 240 x 65 dot LCD and a 4 x 4 Keyboard. user can use it to display picture, string, integer, float, and input a character, string, integer and float. |
| Redundant Bus7000 | Two ISaGRAF contollers can link to remote I-7000 & I-87K I/O modules at the same time. Only one controller is active to control these remote I/Os. If one is dead, teh other one will take over the control of remote I/Os. |
| Battery Backup SRAM | Supports up to 1024 retain variables with a S256/S512 plug in the socket of the back-plane. Data can also be stored in the S256/S512, and then PC can load these data via COM1 or Optional: S256: 256 KB, S512: 512 KB |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
User's Manual
Driver
MiniOS7 Update
Add a review
Your email address will not be published. Required fields are marked *