| Share On: | |
|---|---|
| Categories: | Modbus Converters | J1939 to Modbus RTU Converters | J1939 to Modbus Converters | Modbus Converters and Gateways |
| Review: | Write your review |
| Resources: |
The GW-7238D J1939 to Modbus TCP server / Modbus RTU Slave Gateway is a gateway that provides conversion between J1939 and Modbus TCP/ Modbus RTU protocol. For J1939 network, the GW-7238D supports PDU1, PDU2, broadcast and destination specific type of J1939 messages. For Modbus TCP/RTU network, the GW-7238D is a Modbus TCP server / RTU slave to reply the request from Modbus TCP client / RTU master. Utility software is provided for users to configure J1939 and Modbus TCP/RTU setting in the GW-7238D. The application fields can be diesel power-train applications, In-Vehicle networks for trucks and buses, etc.
The following figure shows the application architecture for the GW-7238D

Module specs
Modbus Features

GW-7238D Utility Main Screen

Modbus monitoring table
ICP DAS Fieldbus Gateways Comparison Table:
Support Protocol |
GW-7228 |
GW-7238D |
GW-7433D |
I-7231D |
I-7232D |
I-7241D |
J1939
|
J1939 |
CANopen Master |
CANopen Slave |
CANopen Slave |
DeviceNet Slave |
|
Modbus RTU lave |
Modbus TCP Server RTU Slave |
Modbus TCP server RTU Slave |
DCON Master |
Modbus RTU Master |
DCON Master |
|
Comm. Interface |
RS-232 RS-422 RS-485 |
RS-232 RS-485 Ethernet |
RS-232 RS-485 Ethernet |
RS-232 RS-485 |
RS-232 RS-485 |
RS-232 RS-485 |
Support Protocol |
I-7242D |
GW-7243D |
GW-7434D |
GW-7552 |
GW-7553 |
GW-7557 |
DeviceNet Slave |
DeviceNet Slave |
DeviceNet Master |
PROFIBUS DP-V0 Slave |
PROFIBUS DP-V0 Slave |
PROFIBUS DP-V0 Slave |
|
Modbus RTU Master |
Modbus TCP/RTU/ ASCII Master |
Modbus TCP Server RTU Slave |
Modbus RTU/ASCII Master/Slave |
Modbus TCP/ RTU/ASCII Master/Slave |
HART Master |
|
Comm. Interface |
RS-232 RS-485 |
RS-232 RS-485 Ethernet |
RS-232 RS-485 Ethernet |
RS-232 RS-422 RS-485 |
RS-232 Ethernet |
RS-232 |
Support Protocol |
HART-710 |
GW-5492 |
GW-5493 |
HART Master |
BACnet/IP Server |
BACnet/IP Server |
|
Modbus RTU/ASCII Slave |
Modbus RTU Master |
Modbus TCP Client |
|
Comm. Interface |
RS-232 RS-422 RS-485 |
RS-232 RS-485 Ethernet |
RS-232 Ethernet |
Hardware |
|
CPU |
80186, 80 MHz or compatible |
CAN Interface |
|
Controller / Transceiver |
NXP SJA1000T with 16 MHz clock / NXP 82C250 |
Channel number |
1 |
Connector |
5-pin screwed terminal block (CAN_L, CAN_H, N/A for others) |
Baud Rate (bps) |
250 k |
Isolation |
1000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminator Resistor |
Jumper for 120 Ω terminator resistor |
Specification / Protocol |
ISO-11898-2, CAN 2.0A and CAN 2.0B / J1939 |
UART Interface |
|
COM 1 / Protocol |
RS-232 / Modbus RTU |
COM 1 Connector |
5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND) |
COM 2 / Protocol |
RS-485 (Self-turner inside) / Modbus RTU |
COM 2 Connector |
2-pin screwed terminal block (DATA+, DATA-) |
Ethernet Interface |
|
Controller |
10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
Connector / Protocol |
RJ-45 with LED indicator / Modbus TCP |
LED |
|
Round LED |
PWR / J1939 / MODBUS / ERR |
Power |
|
Power supply |
Unregulated +10 ~ +30 VDC |
Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
Power Consumption |
2 W |
Mechanism |
|
Installation |
DIN-Rail |
Dimensions |
122mm x 72mm x 33mm (L x W x H) |
Environment |
|
Operating Temp. |
-25 ~ 75 ℃ |
Storage Temp. |
-30 ~ 80 ℃ |
Humidity |
10 ~ 90% RH, non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *