FRB-200H / 200L

The FRB-200H / 200L has officially been phased out and no longer available. The suggested replacement is FRB-200U
 

PC-based I/O control systems are widely used in measurement and control system applications. But sometimes it is very difficult to meet the demands of critical timing control missions. As a result of the special features of FRnet, such as real I/O synchronization and fixed scan time, FRB boards can be added to PC-based systems to give additionial PLC-like control functions, with no need to mix PC-based controlers with PLCs. The FRB-200/100 is an isolated FRnet communication board. The FRB-100 has a single FRnet port, while the FRB-200 has two FRnet ports. Each FRnet port can control a maximum of 16 communication nodes, numbered from 0 to 15. Each single node of the remote I/O module can control a maximum of 16 DI/DO channels. In other words, each FRnet port can control a maximum of 128 DI and 128 DO channels. Traditional high-channel I/O cards occupy several PC slots, such as the ICPDAS PIO-D144 or DIO-144, and the bulky cables can be difficult to handle. Several FRB boards can be combined to work together to control thousands of I/O channels. Reduced cabling, lower labor costs, easy installation and higher reliability are the major advantages of an FRnet solution.

• 5Vdc PCI Bus add-on card
• Innovative Token-stream communication technology
• Real I/O synchronization capability
• Real deterministic control
• Fixed scan time:
• 128 input /128 output points @ 2.9mS (-L version)
• 128 input /128 output points @ 0.7mS (-H version)
• Ultra high speed distributed I/O control capability
• Memory-mapping I/O programming
• Easily programmable
• No transmission protocol required meaning no software overhead
• Two-wire cabling
• OS independent

Applications

• Industrial Automation
• Remote I/O control
• Building Automation
• Parking Lot Management