DL-301-IP65

$929.00

Remote CO/Temperature/Humidity/Dew Point Data Logger with Safety Alarm, Ethernet, RS-485 and PoE. Supports DCON, Modbus RTU, Modbus TCP and MQTT.

Availability: IN STOCK | FASTEST DELIVERY : Saturday, Sep 26 | Enter ZIP below for shipping options

Share On:
Categories:	New Products \| Motion, Temperature and Leak Detection Sensors \| CL & DL Series Environmental Data Logger
Review:	Write your review
Resources:	Data Sheet DL-300 Utility Quick Start

Introduction

The DL-301-IP65 is an IP65-rated industrial data logger for monitoring carbon monoxide (CO), temperature, relative humidity and calculated dew point. It uses an electrochemical CO sensor with a 0 to 1000 ppm measurement range and includes a 2.8-inch LCD touch screen. The module can store up to 450,000 time-stamped records for later download and analysis.

For system integration, the DL-301-IP65 provides one RS-485 port and a 10/100 Base-TX Ethernet port. It supports DCON and Modbus RTU over RS-485, plus Modbus TCP and MQTT over Ethernet. The module can be powered from a +12 to +48 VDC input or through IEEE 802.3af Class 1 PoE. Four PhotoMOS relay outputs can be used with audible or visual alarm devices or compatible control equipment.

Features

Measures CO, temperature and relative humidity; calculates dew point
Electrochemical CO sensor, 0 to 1000 ppm range
2.8" LCD Touch Screen
Stores up to 450,000 timestamped records
Touch-screen and web-based configuration
DL300 Utility plus iOS and Android app support
Supports multilingual display messages
Supports DCON and Modbus RTU over RS-485
Modbus TCP and MQTT over Ethernet
10/100 Base-TX Ethernet and IEEE 802.3af Class 1 PoE
Four PhotoMOS relay outputs, 100 VDC at 1 A
IP65 ingress protection rating

Large 2.8" LCD Touch Screen, with clear Color Chart to indicate the CO Level

Supports the MQTT Protocol for IoT Applications

Simple and powerful utility

The DL300 Utility can configure modules, monitor real-time values and organize multiple DL-300 devices into groups. Logged data can be downloaded and exported as a CSV file for analysis in spreadsheet or other compatible software.

Multi-platform Remote Access Software

Real-time data can be viewed using the DL300 Utility, the iOS or Android app, or a web browser when the monitoring device and data logger are connected to the same local network.

Display Messages in Multiple Languages

The display-message-on-screen function supports multiple language character sets based on UTF-8 encoding. Either pre-configured messages or dynamic messages can be remotely displayed using Modbus commands, or a dynamic message can be sent via the web-based interface.

Specifications

Software
Built-in Web Server	Yes

CPU Module
Real Time Clock	Yes
Watchdog Timer	Yes, Module (2.3 sec), Communication (Programmable)

Display
Backlight Life	20,000 hours
Brightness	160 cd/m2
Touch Panel	Yes
LCD Information Displayed	2.8 TFT (Resolution 240 x 320 x 16), Defective Pixels <= 3 Backlight Life 20,000 hours

LED Indicators
Status	PWR: Green for normal operation Link: Green for the Ethernet-linked S1 ~ S4: Red for an alarm condition

System
Security	IP filter (whitelist) and Password (web)
Real Time Clock	Yes
Data Logger	Yes, up to 450,000 records

Temperature Measurement
Range	-20 ~ +50°C
Resolution	0.1°C
Accuracy	±0.6°C

Humidity Measurement
Range	0 ~ 100% RH, Non-condensing
Resolution	0.1% RH, Non-condensing
Accuracy	±5% RH, Non-condensing

Dew Point
Range	Calculated using temperature and relative humidity
Resolution	0.1°C

CO Measurement
Sensor Type	Electrochemical
Range	0 ~ 1000 ppm
Resolution	1 ppm
Accuracy	±5% of measured value
Response Time	30 seconds
Warm-up Time	300 seconds

Relay Output
Type	PhotoMos Relay 4, 100 VDC @ 1 A

Ethernet
Ports	10/100 Base-TX, 8-Pin RJ-45 x1(Auto-negotiating, Auto-MDI/MDIX, LED indicators)
PoE	Yes
Protocol	DCON, Modbus RTU, Modbus TCP, MQTT

COM Ports
Ports	1 x RS-485
Baud Rate	1200 ~ 115200 bps
Protocol	DCON, Modbus/RTU

Power
Consumption	PoE: 2.9 W (Max.) Non-PoE: 2.7 W (Max.)
Powered from PoE	IEEE 802.3af, Class 1 (48 V)
Powered from Terminal Block	+12 ~+48 VDC

Mechanical
Dimensions (mm)	116 x 211 x 70 (W x L x H)
Installation	DIN-Rail or Wall Mounting
Ingress Protection Rating	IP65

Environment
Operating Temperature	-20 ~ +50°C
Storage Temperature	-30 ~ +75°C
Humidity	10 ~ 90% RH, Non-condensing

Add a review

Your email address will not be published. Required fields are marked *

Overall ratings

Select Rating *

You must be signed in to review! Click here to sign in.