| Share On: | |
|---|---|
| Categories: | DeviceNet Data Acquisition |
| Review: | Write your review |
| Resources: |
The CAN-2015D is an 8 Channel RTD Analog input DeviceNet slave device. RTD input status and configuration of CAN-2015D can be done through the EDS file. DeviceNet heartbeat and shutdown messages can also be done with this device.
This device is in compliance with DeviceNet specification Volume 1 Release 2.0 and Volume 2 Release 2.0, Errata 5. This is also a Group 2 Only Server (non-UCMM-capable) device. A predefined Master/Slave Connection Set is one of its features. Supported connections are the following: 1 connection for Explicit Messaging, 1 connection for Polled I/O, and 1 connection for Bit0Strobe I/O connection.
DeviceNet Interface |
|
Channels |
8 |
Wiring |
2/3 Wire |
Individual Channel |
Yes |
Sensor Type |
RTD (Pt100, Pt1000, Ni120, Cu100, Cu1000, Pt100) |
Voltage Input Range |
- |
| Current Input Range | - |
| Resolution | 16-bit |
| Sampling Rate | 10 Hz |
| Accuracy | ±0.05 % of FSR |
| Zero Drift | ±0.5 μV/ °C |
| Span Drift | ±20 μV/ °C |
| Overvoltage Protection | 240 Vrms |
| Input Impedence | 20 MΩ |
| Common Mode Rejection | 150 d |
| Normal Mode Rejection | 100 dB |
Communication |
|
| Connector | 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
| Baud Rate (bps) | 125 k, 250 k, 500 k |
| Terminator Resistor | Switch for 120 Ω terminator resistor |
| Node ID | 0~63 selected by rotary switch |
| Protocol | Volume I, Release 2.0 & Volume II, Release 2.0, Errata 5 |
| DeviceNet Subscribe | Group 2 Only Server |
| Explicit Connection | Yes |
| Polled I/O Connection | Yes |
| Bit-Strobe I/O Connection | Yes |
| Heartbeat message | Yes |
| Shutdown message | Yes |
System |
|
| ESD Protection | 4 kV Contact for each channel |
| Isolation | 3000 VDC for DC-to-DC, 2000 Vrms for bus-to-logic |
Watchdog |
Yes |
Power |
|
Input Range |
Unregulated +10 ~ +30 VDC |
Power Consumption |
1.5 W |
Mechanism |
|
| Installation | DIN-Rail |
Dimensions |
33 mm x 107 mm x 102 mm ( W x L x H ) |
Environmental |
|
Operating Temperature |
-25°C ~ +75°C (-13°F ~ +167°F) |
Storage Temperature |
-30°C ~ +80°C (-22°F ~ +176°F) |
Ambient Relative Humidity |
10 ~ 90% RH, non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *