| Share On: | |
|---|---|
| Categories: | CANopen Data Acquisition |
| Review: | Write your review |
| Resources: |
Best suited for embedded networks dealing with machine controlling in aerial industry, medical field, factory automation, remote data acquisition, packaging machine control, environment monitoring, the CAN-2026C is the ideal device to create a robust system to meet your needs.
Following the CiA-301 version 4.02 and CiA-401 version 2.1, the CAN-2026C allows access to analog and digital I/O status and configuration settings through standard CANopen protocol. This device can work seemlessly with stanard CANopen master through the EDS file.
CANopen Interface |
|
Connector |
5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
Baud Rate (bps) |
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M, selected by rotary switch |
Terminator Resitor |
DIP switch for the 120 Ω terminator resistor |
Protocol |
CANopen CiA 301 ver4.02, CiA 401 ver2.1 |
Node ID |
1~99 selected by rotary switch |
NMT |
Slave |
Error Control |
Node Guarding protocol / Heartbeat Producer |
SDOs |
1 server, 0 client |
PDOs |
10 RxPDO, 10 TxPDO (Supports dynamic PDO) |
PDO Modes |
Event-triggered, remotely-requested, synchronous (cyclic), synchronous (acyclic) |
Emergency Message |
Yes |
EDS file |
Yes |
Analog Input |
|
Channels |
6 (Differential) |
| Input Type | +/-150mV, +/-500 mV, +/-1V, +/-5 V, +/-10 V, +/-20 mA (External 125Ω resistor required) |
Sampling Rate |
60 Samples/Sec. (Total) |
Zero Drift |
+/-10 uV/°C |
| Span Drift | +/-25 ppm/ °C |
Common Mode Rejection |
86 dB Min. |
Normal Mode Rejection |
100 dB |
| Resolution | 16-bit |
| Over Voltage Protection | 240 Vrms |
| Individual Channel Configuration | Yes |
Analog Output |
|
| Channels | 2 |
| Output Type | +0V ~ +5V, +/-5V, +0 V ~ +10V,+/-10V |
| Resolution | 12-bit |
| Accuracy | +/-0.1% of FSR |
| Voltage Output Capability | 10 V @ 20 mA |
| Current Load Resistance | 500 Ω |
| Power-on Value | Yes |
| Safe Value | Yes |
Digital Input |
|
| Channels | 2 |
| Input Type | Wet contact (Sink) |
| On Voltage Level | +3.5VDC ~ 50 VDC |
| Off Voltage Level | +1 VDC Max. |
| Input Impedence | 10 KΩ, 0.66W |
| Over Voltage Protection | 70 VDC |
Digital Output |
|
| Channels | 1 |
| Output Type | Isolated Open Collector (Sink) |
| Max Load Current | 700 mA/channel Max. |
| Load Voltage | +3.5 VDC ~ +50 VDC |
| Over Voltage Protection | 60 VDC |
| Overload Protection | Yes |
| Short Circuit Protection | Yes |
Power-On Value |
Yes, Programmable |
Safe Value |
Yes, Programmable |
LED |
|
CANopen |
3 LEDs to PWR, RUn and ERR |
Terminal Resistor |
1 LED to terminal resistor indicator |
Power |
|
| Power Supply | Unregulated +10 ~ +30 VDC |
Power Consumption |
1.8 W |
Mechanism |
|
| Installation | DIN-Rail |
Dimensions |
33 mm x 99 mm x 78 mm (W x L x H) |
Environment |
|
Operating Temp. |
-25°C ~ +75°C (-13°F ~ +167°F) |
Storage Temp. |
-30°C ~ +80°C (-22°F ~ +176°F) |
Humidity |
10 ~ 90% RH, non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *