PISO-730A (current sinking)

$0.00

32 Channel TTL-level Digital I/O, 16 Channel Optically Isolated Digital Input and 16 Open-Collector Digital Output Board (Current Sinking)

Product Unavailable

Share On:
Categories:	PCI Data Acquisition Boards
Review:	Write your review
Resources:	User's Manual PIN Assignment Data Sheet

This Product has been phased out and replaced by PISO-730AU

The PISO-730A provides 32 channels isolated digital I/O (16 DI and 16 DO) and 32 channels TTL-level digital I/O (16 DI and 16 DO). Each digital output offers a PNP transistor and integral suppression diode for inductive load. The board interface to field logic signals, eliminating ground-loop problems and isolating the host PC from damaging voltages. Its isolated I/O channels provide up to 3750Vdc of protection.

The PISO-730A has one 37-pin D-type connector and two 20-pin flat-cable connectors. The flat-cable can be connected to ADP-20/PCI adapter. The adapter can be fixed on the chassis. It can be installed in a 5V PCI slot and can support truly "Plug and Play"

PCI Bus
16 isolated DI/DO channels
32 TTL-level DIO channels (16 x DI & 16 x DO)
DC/DC converter built-in
One DB-37 D-type connector for isolation input and output
Two separate 20-pin connectors for non-isolated input and output channels.
3750Vdc isolation voltage
n Interrupt: 2 channels
5V PCI board

Software

Toolkit for DOS
Toolkit for Windows 95/98
Toolkit for Windows NT
Toolkit for Windows 2000/XP
LabVIEW toolkit for Windows
Toolkit for OCX 95/98
Toolkit for OCX NT
Toolkit for OCX 2000/XP
Toolkit for LINUX
Toolkit for DasyLab

Applications

Factory automation
Product test
Laboratory automation

Specifications

Isolated Digital Input

16 Optical-isolated inputs
Type : Isolated current input
Isolation Voltage : 3750Vdc
Input voltage : 3.5V to 30 Vdc
Input impedance : 1.2K/1W
Response time: 10KHz Max
16 TTL-level inputs
Logic high voltage: 2.4V (Min.)
Logic low voltage: 0.8V (Max.)

Isolated Digital Output

16 optical-isolated outputs
Output voltage: open-collector 10 to 30 Vdc
Isolation voltage : 3750Vdc
Source current: 100mA max.
Response time: 10KHz max.
16 TTL-level Outputs
Sink current: 8 mA (Max.)
Source current: 0.4 mA (Max.)

Environmental

Operation Temperature: 0°C to 60°C
Storage Temperature: -20°C to 70°C
Humidity: 0 - 90%, non-condensing
Dimensions: 180mm x 105mm
Power consumption: 5V/600mA

Add a review

Your email address will not be published. Required fields are marked *

Overall ratings

Select Rating *

You must be signed in to review! Click here to sign in.