| Share On: | |
|---|---|
| Categories: | WISE Expansion I/O Modules | WISE Data Acquisition Controllers |
| Review: | Write your review |
| Resources: |
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.
WISE-7902 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7902 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
This module WISE-7902 supports Modbus TCP protocol to make seamless integration with SCADA software available. It supports an I/O expansion bus to implement various I/O functions such as D/I and D/O according to the using FRnet modules: FR-2053T, FR-2054T, and FR-2057T.
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.
| CPU Module | |
| CPU | 16-bit CPU |
| SRAM | 512 KB |
| Flash | 512 KB |
| EEPROM | 16 KB |
| NVRAM | 31 Bytes |
| OS | MiniOS7 |
| RTC (Real Time Clock) | RTC Provide seconds, minutes, hours, date of week/month; month and year, valid from 1980 to 2079 |
| 64-bit Hardware Serial Number | Yes |
| Watchdog Timers | Yes (0.8 second) |
| Communication Ports | |
| Ethernet | RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators) |
| COM 1 | No (Unsupported by WISE firmware) |
| COM 2 | No (Unsupported by WISE firmware) |
| FRnet | Max. 1 M |
| LED Indicators | |
| System LED | Yes (Red) |
| LED Display | - |
| Special Indicator | PoE LED (Green) |
| Mechanical | |
| Dimensions (W x H x D) | 72 mm x 123 mm x 35 mm |
| Installation | DIN-Rail or Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Ambient Relative Humidity | 5 ~ 90% RH, non-condensing |
| Power | |
| Protection | Power reverse polarity protection |
| Frame Ground | Yes (for ESD Protection) |
| Input Range | +12 ~ +48 VDC |
| Power over Ethernet (PoE) | IEEE 802.3af Class 1 |
| Power Consumption | 1.5 W |
| Functions | |
| Rule Configuration Website | Access Web server on WISE controllers to edit and upload logic rules through web browser. |
| 36 IF-THEN-ELSE Logic Rules | 3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions |
| 48 Internal Registers | Hold temporary variables and read/write data via Modbus TCP address. |
| 12 Timers | Delay / Timing functions. |
| 12 Schedules | Setup prescheduled routine tasks. |
| 12 Emails | Send Email messages to pre-set Email receivers. |
| 12 CGI Commands | Send pre-set CGI commands. |
| 12 Recipes | Set up THEN/ELSE action groups. |
| 8 P2P remote modules | Set up the connection information for the remote WISE modules. |
| Modbus TCP Protocol | Real time control and monitoring I/O channels and system status of controllers via SCADA software. |
| IF Conditions | |
| DI Channel | ON、OFF、ON to OFF、OFF to ON、Change |
| Internal Register | =、>、<、>=、<=(value) |
| DI Counter | =、>、<、>=、<=(value)、Change |
| DO Counter | |
| Timer | Timeout、Not Timeout |
| Schedule | In Range、Out of Range |
| P2P | DI、AI、DI counter、DO counter、IR |
| Rule Status | Enable、Disable |
| THEN / ELSE Actions | |
| DO Channel | ON、OFF、Pulse Output |
| Internal Register | Change the value |
| DI Counter | Reset |
| DO Counter | |
| Timer | Start、Stop |
| Schedule | |
| Send | |
| CGI Commands | |
| Recipe | Execute |
| P2P | DO(On/Off)、AO、IR |
| Rule Status | Enable、Disable |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
User's Manual
Firmware
MiniOS7 Utility
Add a review
Your email address will not be published. Required fields are marked *