| Share On: | |
|---|---|
| Categories: | ISaGRAF PACs | Micro PAC |
| Review: | Write your review |
| Resources: |
The μPAC-7186EX-SM is a palm-size programmable automation controller (PAC) that has Ethernet, RS-232, and RS-485 communication capabilities. It has a 7 segment display. ICP DAS USA provides easy-to-use software development tool kits (Xserver, VxComm, Modbus libraries). With easy integration to serial devices, this device has the ability connect through standard Modbus protocol to communicate with SCADA software (Indusoft, ISaGARF, DasyLab, Trace Mode, Citect, iFix, etc.).
The hardware supports an I/O expansion bus. The I/O expansion bus can be used to implement various I/O functions such as D/I, D/O, A/D, D/A, Timer/Counter, UART, flash memory, battery backup SRAM, ASIC key & other I/O functions. Nearly all kinds of I/O functions can be implemented by this bus but the bus can support only one board. There are more than 50 boards available for μPAC-7186EX-SM, you can choose one of them to expand hardware features.
| CPU | |
| CPU | 80186 or compatible (16-bit and 80 MHz) |
| SRAM | 640 KB |
| Flash | 512 KB; Erase unit is one sector (64K bytes); 100,000 erase/write cycles. |
| EEPROM | 16 KB Data retention: 40 years; 1,000,000 erase/write cycles |
| NVRAM | 31 Bytes (battery backup, data valid up to 10 years) |
| RTC (Real Time Clock) | RTC Provide seconds, minutes, hours, date of week/month; month and year, valid from 1980 to 2079 |
| 64-bit hard Serial Number Built-in | Yes |
| Watchdog Timer | Yes (0.8 second) |
| Communication Interface | |
| COM1 | RS-232 (TxD, RxD, CTS, RTS and GND); Non-isolated |
| COM2 | RS-485 (D2+, D2-; self-tuner ASIC inside); Non-isolated |
| Ethernet Port | 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX, LED indicator) |
| COM Port Formats | |
| Data bit | 7, 8 |
| Parity | Even, Odd, None |
| Stop bit | 1 |
| LED Display | |
| 5-Digit 7 Segments LED Display | Yes |
| System LED Indicator | Yes |
| Hardware Expansion | |
| I/O Expansion Bus | Yes |
| User Defined I/O Pins | 14 pins |
| Dimensions | |
| Dimensions (W x H x D) | 72 mm x 123 mm x 35 mm |
| Operating Environment | |
| Operating Temperature | -25°C ~ +75°C (-13°F ~ +167°F); |
| Storage Temperature | -40°C ~ +80°C (-40°F ~ +176°F) |
| Relative Humidity | 5 ~ 90% RH, non-condensing |
| Power | |
| Protection | Power reverse polarity protection |
| Frame Ground for ESD Protection | Yes |
| Required Supply Voltage | +10 ~ +30 VDC (non-regulated) |
| Power Consumption | 3.0 W |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
User's Manual
Software
I/O Expansion Boards
Add a review
Your email address will not be published. Required fields are marked *