Zhangbei Wind, Solar & Energy Storage Demonstration Project (China)
Zhangbei Wind, Solar & Energy Storage Demonstration Project (China)
ICP DAS USA’s renewable energy monitoring solution provides reliable, scalable management of wind, solar, and energy storage systems. By integrating the VP-25W1, XP-8341, and a customer-developed BMU over the robust CAN Bus network, the system enables stable communications, efficient battery management, and centralized monitoring.
Centris Technologies / (www.centristech.com):Centris Technologies is one of ICP DAS USA’s solution providers for ISaGRAF products.
Eptix / (eptix.com): Eptix is our Embedded / PLC Controllers, Data Acquisition and Data Control solution provider in Canada
Logic Bus / (www.logicbus.com.mx):Logic Bus is ICP DAS USA’s master distributor for Mexico. Aside from their distributorship, Logic Bus also functions as a system integrator and solution provider for ICP DAS USA.
Prologic Controls / (www.prologic-controls.com):Prologic Controls is a premeir solution provider and system integrator for ICP DAS USA in North America.
REC Solar / (www.recsolar.com) REC Solar provides high-quality solar solutions and flexible financing options to a wide range of commercial energy customers nationwide.
Embedded Partners
Indusoft / (www.indusoft.com): ICP DAS is an Indusoft™ embedded partner, and has successfully implemented the Indusoft™ “Web-Ready” HMI solution on the WinCON-8000 Programmable Automation Controllers.
Intel / (www.intel.com):ICP DAS is an Intel™ chip-set embedded partner.
Microsoft / (www.microsoft.com): ICP DAS is a Microsoft embedded partner, and has successfully developed a Windows™ based control solution in the WinCON-8000 Programmable Automation Controllers.
Linux (http://www.linux.org): Linux is a free and open source operating system that comes inside of ICP DAS LinPAC Linux based programmable controllers.
IntevalZero (http://www.intervalzero.com): IntervalZero provides real-time software technology for Industrial Automation, Medical Systems, Digital Media, Test & Measurement, Military & Aerospace, and other industries.
AMD / (www.AMD.com): ICP DAS is an AMD™ chip-set embedded partner.
DasyLab / (www.dasylab.com): ICP DAS provides Dasylab™ drivers for many of their I/O solutions.
LabVIEW / (www.ni.com/labview): ICP DAS provides LabVIEW™ drivers for many of their I/O solutions.
ISaGRAF / (www.isagraf.com): ICP DAS is an ISaGRAF™ embedded partner, and has successfully implemented the ISaGRAF ladder logic programming solution on the WinCON-8000 Programmable Automation Controllers.
Energy Monitoring Systems using Modbus
Enhancing Energy Management with ICP DAS USA Smart Power Meters
ICP DAS USA specializes in providing robust solutions for Energy Management Systems and Smart Power Monitoring. Our smart power meters are essential components for accurately monitoring power consumption and analyzing energy usage across industrial and commercial applications.
Comprehensive Power Monitoring and Management Systems
ICP DAS USA offers complete solutions for Power Monitoring and Management Systems. These systems integrate advanced smart power meters, dedicated power meter data loggers, data servers, and powerful SCADA software to deliver comprehensive and user-friendly management capabilities for any control center.
Key benefits of our energy management solutions include:
-Real-Time Data Access: Users can monitor their power consumption data instantly via mobile devices and PCs.
-Cost Savings: By accurately tracking energy consumption data, businesses can identify waste and implement changes to reduce energy usage and save on energy costs significantly.
-Simple Setup: The system is designed for easy deployment and configuration using a user-friendly web configuration interface, eliminating the need for complex programming skills.
-Scalability: Our flexible power monitoring and management system is suitable for both small-scale and large-scale industrial or building automation projects.
Integration with Industrial Control Hardware
Our smart power meters are engineered for seamless integration with a variety of industrial control and data acquisition devices:
-Touch Screen PLCs (Programmable Logic Controllers): Devices like the TPD-433-H can directly display real-time power consumption data, often using easy-to-read graphical gauges to show desired level status.
-Data Loggers: Essential for recording long-term energy usage trends and historical data analysis.
-Programmable Automation Controllers (PACs): PACs provide high-performance control and monitoring capabilities for advanced energy management strategies.
-PC and SCADA Software: SCADA software is crucial for displaying complex power consumption data in a clear, understandable, and centralized format.
Connectivity and Protocol Support
For networking and communication, products like the tGW-715 Modbus RTU to Modbus TCP converter are critical. This device enables Modbus RTU power meters to communicate effectively with Ethernet-based devices such as PCs and controllers running on the Modbus TCP protocol, ensuring reliable data transfer across the network.
ISaGRAF and Automation Control
ISA-GRAF Programmable Automation Controllers are a perfect fit for advanced energy management applications. They can be utilized for precise control and monitoring functions, fully supporting communication with power meters using the standard Modbus RTU protocol.
Home Automation
Home automation is trending now. The home automation solutions can automatically turn on/off your lights or other electronic devices when needed. It can also automatically turn on the fan or AC when the temperatures goes beyond the preset level. With alarm system connected, home automation system can also work as a home security system, where it can trigger alarms when someone breaks into your home when you are out. It can also trigger the alarms or call the police when it detects unusually high level of monoxide or smoke.
The home automation solutions provided by ICP DAS USA comprise of touch screen controllers like TPD-280 or TPD-430 to easily monitor and control your devices on a color screen, smart power meters like PM-3112 to have real time access to your electricity usage, universal IR (Infrared) learning remote module and Infrared to Modbus RTU slave converter like IR-210 to automatically control all your entertainment equipment such as TV, DVD player and music player. For more specific lighting control, you can also add a device LC-103. For a wireless home automation system, ICP DAS USA also provides wireless modules like WF-2055 and Zigbee wireless devices like ZT-2017 so that you can view the real time status of your home and easily control your home devices on your phone. Touch Screen Controllers fit in electrical outlets for easy touch based remote control and presents a very user-friendly interface. A web server can run in a programmable automation controller (PAC) like XP-8041 and can publish a web page for access from remote web browsers in smart phones. The PAC controller can be connected to devices like Wi-Fi access points, PM-2133 power meters, IR-210 Infrared to Modbus RTU converters, zigbee converters, and I/O modules. The web page allows users to turn devices on or off simply through the web browser so no programming skills are required.
Compact Touch Screen Controller PLC with high resolution TFT color touch screen which fits in regular electrical wall-mount outlets, communicable over RS-485. Supports Modbus RTU. Includes HMIWorks Ladder Designer and C language programming development environment.
4.3″ Touch Screen PLC with RS-485 and USB ports, Real Time Clock and fits in regular electrical wall mount outlets. Comes with Free HMIWorks C Language and Ladder Logic Programming Development Environment.
Universal IR (Infrared) Learning Remote Module with two CA-IR-SH2251 cables. It is a Modbus RTU slave that can interface with Modbus RTU Master devices like PC’s, PLC’s and Touch Screen Controllers.
ICP DAS TouchPAD provides scenarios control (Lighting, Dimmer, Air Conditioning, Multimedia… etc) to replace the traditional mechanical switches.
Zigbee application can form an easy wireless controlling network
With LC-103, it can connect and control the lighting easily.
Supports infrared (IR-210/IR-712) interface, makes learning effrortless, and allow easy control of peripheral appliances
Smart power meter application for real-time power consumption monitoring
Smart phone application via WiFi to enable the HA control through smart phone
Home and Building Automation
Amphitheater: Automation Makes a Room More Useful
Mobile devices have spread everywhere in recent years. Notebooks, tablet computers, and smartphones have become increasingly connected with our daily lives. Extending control to these handheld electronics has become a priority so to increase accessibility.
Using LinPAC and the TouchPAD controller together in the amphitheater along with other modules allows for complete control over the whole system, as well as detailed sensors levels on power consumption, temperature, and humidity. Not only can all this be done through the TouchPAD (connected via HMI to the LinPAC controller), but it can also be done on your mobile phone or computer; the if the LinPAC is connected to a wireless network, it’s as easy as pointing your web browser to the appropriate page to access a control panel. Nor do the TouchPAD and separate device interfere with each other; they can be used separately, one without the other, or together in paralell – and where one makes a change, the other immediately updates its display to reflect as such: a very convenient feature.
The LinPAC-5000 is the heart of the system. It’s a palm-sized Linux-based controller; and as with most Linux systems, it’s easily customizable to give users a great deal of flexibility to meet many different needs.
The LinPAC-5000:
operates via the DCON protocol, and answers to the I-7000 module and DL-100 temperature + humidity module
reads through the modbus master PM-2133 meter values
provides the TPD-430 modbus slave communication
provides a web interface for mobile devices or PC access
implements logic control (e.g. situational mode, automatic temperature control)
provides shared memory so that programs can communicate among each other; also makes adding different protocols or expanding application support easier.
The HMI section online takes into account the cross-platform component by using HTML and Ajax. While Java and Flash, too, compete for dominance in the cross-platform world, there are plenty of examples where using Flash is impractical (iOS being the prime example). A more comprehensive cross-platform solution is reached with the combination of HTML and Ajax, meaning less work pushed into the porting and more in the actual application.
In the post-PC era, mobile phones, tablets, and other devices have crept up to become the general computing machines of the generation. They have started to bridge the disconnect between home automation and personal computing; but to continue this, manufacturers must continue to provide support for mobile devices – a new topic itself in the post-PC age.
Application of the DI Latch to Switch Control
Sensors situated in staircases generally rely on the presence of a person in the stairwell in order to trigger the lights. As with the push-button example, any change is transient, so the DI Latch approach is well-employed here to detect changes in the signal to switch on the stairwell lighting.
Energy Efficiency
In terms of the general-use control kit plus housing, implementation costs about 90,000 New Taiwan Dollars ($3,000). For an annual electric bill of 25,000 NTD, ICP DAS estimates as much as 40% savings on energy – typically in the area of 7,000 NTD. This means that one breaks even in about a decade – whereupon the benefits REALLY begin to kick in from the energy savings.
The Ten Thousand Buddhas Hall’s Lighting Control
The project is ambitious; its aim is to create a beautiful temple of light and music, complete with a full-features monitoring system to oversee the ten thousand Buddhas on their shelves all around the temple. The controls on the multitude of LED lights must be fine enough to react to the flow of guests entering the hall, to inspire them with a feeling of holiness.
Ten thousand Buddha Hall Lighting & Sound System Functions
In the Ten thousand Buddha Hall, there are ten thousand statues and ten thousand glass LED lights:
Ten thousand statues and ten thousand glass LED lights – ten thousand inputs to feed the computer, all processed separately and controlled independently.
The ten thousand Buddha statures and ten thousand glass LED lights can also be lit up at the same time.
To suit the Medicine Buddha Mandala, ICP DAS designed a sensor that would project colored lights. They came in shades of blue, red, yellow, black, and white; in addition, the steup was made to trigger lights and Buddha music(Medicine Buddha Dharani) automatically when visitors entered a certain area.
The Ten Thousand Buddha’s dimensions are 75 by 47 by 18 meters; the control room next to the Ten Thousand Buddha was 8 by 5 meters.
Efficiency in Use
This setup enables customers to control all ten thousand as one, or manipulate each LED (from 0 to 10000) individually, because each I-7045D can control 16 of the LEDs, which makes wiring much easier. More importanlty, sucha solution cut almost half the cost comparing to using PLCs.
ICP DAS GST-43 Earthquake Switch, Deployed at a Chemical Plant
ICP DAS R&D team presents the GST-43 seismic switch that’s used to predict and prevent secondary disasters. It’s Can be applied to people’s livelihood, factories, elevators, construction and other occasions
Introduction
Earthquakes come uninvited and unannounced – and while they may sweep through in a space of seconds, that short period is more than enough to collapse houses, highways, and even critical infrastructure. Floods, droughts, typhoons, and many other natural disasters are considerably easier to brace for – but the earthquake has been a global pain in the side for ages. The secondary disasters that follow earthquakes are sometimes even worse – fires, floods, landslides, illness, and so on. And yet the forces of nature are not entirely beyond human control, provided one takes the proper precautions.
Once again, ICP DAS comes in tights and a cape to the rescue – the R & D team presents the GST-43 seismic switch that’s used to predict and prevent secondary disasters. It’s already used in the elevator industry to make lifts smarter. For example, in case of an earthquake, the elevator controller is made aware of the situation instantly so that it can stop at the nearest floor to let its passengers disembark. The module can also trip additional events per situation, such as cutting off gas / liquid flow in a plant or powering down equipment immediately. These simple things are not so quickly performed by a nervous, quake-shaken crew who are probably all busy ducking and covering – and in the hands of automation the situation need not descend to disaster.
GST-43 Features
The GST-43 uses STA / LTA earthquake judgement logic to sample analog vibration signals a hundred times per second. A 20Hz low-pass filter is used to remove most of the non-seismic vibration signals to distinguish them from actual earthquakes. A built-in real-time clock provides network time management (via the Network Time Protocol) that allows the GST-43 to instantly display the correct time. It can detect and describe the quake along three axes and remember exactly when the last quake occurred. Quake measurement can be done either in CWD (the Taiwanese system) or GB/T-17742-2008 (the Chinese mainland system); triaxial acceleration vector synthesis is built-in, and the instantaneous maximum acceleration along any of the three axes is easily disseminated. The GST-43 daisy-chains well with existing equipment and can be set to trigger user-defined actions when certain seismic levels are exceeded, such as stopping elevators at their nearest floors, or cutting off gas and electricity, or putting machinery into emergency shutdown. Support for Modbus RTU and Modbus TCP Server protocols make these possible: they allow the GST-43 to be connected directly to computers, PLCs, or human machine interfaces, making the recording of seismic activity and interfacing with other devices much easier.
SSFigure 1: A GST-43 system application architecture diagramdown
System Architecture and Operation
When the GST-43 takes on the role of an overseer, it is easily applied in chemical plants to detect earthquakes and immediately. SSA diagram of the complete seismic monitoring system stopper chemical lines to prevent dangerous leakage. Should a chemical tank rupture, its contents could cause serious casualties and invite a slew of tragedy – to say nothing of the paperwork, investigations, and probable lawsuits that follow. Relegating the monitoring to a human is inefficient, inconsistent, unsafe, and wasteful. Such an important task is best given to a failsafe system that responds promptly and safely every time. ICP DAS’s GST-43 rises to the occasion: once a seismic threshold is reached, the corresponding DO (with two DO groups, a sub-start function is easy to implement) to automatically block the chemical lines is started. Because the GST-43 supports Modbus TCP and Modbus RTU communication protocols, it’s easy to integrate into existing systems to ramp up overall control system security. A diagram of the complete seismic monitoring system is shown below:
The Choice is Clear: ICP DAS’ GST-43 Seismic Switch Will Visibly Improve Your Control System Security
The GST-43 is one of a myriad of products that ICP DAS provides to meet users’ diverse needs. The DO is easily tweaked to meet any conditions one cares to set, and the switch supports both Modbus TCP and Modbus RTU, making a marriage to PCs / HMIs and ICP DAS PACs are both speedily accomplished. This particular application – to a chemical plant – is summarized by identify the GST-43 as a dependable system that increases the standard of safety in an industrial setting.
ICP DAS’ long-term commitment to earthquake-related product development guarantees that it will continue to provide customers with solutions for a variety of cases. We will strive to keep creating products that both work and integrate well.
Green Technology
Solar Panel Energy Monitoring
Our data acquisition modules are used in green technology applications! Our ET-7017, I-7017, and M-7017 products can be used to help measure solar power green energy! Many customers, use our M-7017 analog data acquisition module to monitor DC power production. The M-7017 has an input range of ±150mV, ± 500mV, ± 1V, ± 5V, ± 10V and ± 20mA for your electricity measurement needs.
Wind Turbine Blade Temperature Monitoring
Our remote I/O modules are also in use with wind turbines. Many of our customers use our I-7018 thermocouple input module to measure temperatures in the mould that forms the blades for the turbine. We are glad to be a part of the manufacture of green technology. Our ET-7018Z, I-7018, and M-7018 products can be used as well and are communicable in Ethernet, RS-485 and Modbus RTU protocols.
What can we do to serve your application? View our full line of data acquisition hardware and find what fits your industrial control and data acquisition needs.
8-channel Voltage & Current Analog Input with High Voltage Protection and 4-channel Isolated Digital Output Data Acquisition Module, communicable over Ethernet and Modbus TCP Protocol. Supports operating temperatures between -25 to 75°C.
10-channel Thermocouple, Current and Voltage Input with High Voltage Protection and 6-channel Isolated Digital Output Data Acquisition Module with short cable, communicable over Ethernet and Modbus TCP Protocol. The S2 version comes with DN-1822 Daughter Board and 1.8m Cable. Supports operating temperatures between -25 to 75°C.
Analog Input Data Acquisition Module with 8 AI Channels, communicable over RS-485, and FREE EZ Data Logger Software, Supports operating temperatures between -25 to 75°C.
Analog Input Data Acquisition Module with 8 AI Channels, communicable over RS-485, and FREE EZ Data Logger Software, Supports operating temperatures between -25 to 75°C.
8 Channel Voltage & Current Analog Input Data Acquisition Module. Communicable over Modbus RTU and RS-485. Supports operating temperatures between -25 to 75°C.
8 Channel Voltage & Current Thermocouple Input Data Acquisition Module, communicable over Modbus RTU and RS-485. Supports operating temperatures between -25 to 75°C.
IIoT Modbus TCP Controllers for Food & Beverage
WISE-7000 Series: Autonomous Control and Data Logging for F&B Automation
The Food and Beverage industry operates under stringent regulations and high-pressure demands for efficiency, product safety, and quality control. ICP DAS USA addresses these critical needs by providing robust, configurable Industrial Internet of Things (IIoT) and Data Acquisition (DAQ) solutions that ensure operational excellence and compliance with regulations.
ICP DAS USA’s WISE (Web Inside, Smart Engine) modules are crucial for modernizing food and beverage (F&B) facilities. These autonomous, configurable controllers are the core of their IIoT strategy, executing local IF-THEN-ELSE control logic without requiring a host PC or complex programming.
Key Features: All WISE models support the industry-standard Modbus TCP protocol for seamless integration with SCADA systems, feature Power over Ethernet (PoE) for simplified wiring, and are configured entirely via a standard web browser.
Specific WISE Modules for F&B Applications
The diversity of the WISE-7000 series allows for precise matching of I/O requirements across various F&B processes:
WISE-7117
WISE-7126
WISE-7144
WISE-7901
Factory Automation
Leveraging ICP DAS USA’s ZT Series ZigBee Wireless Solutions
In the era of Industrial IoT (IIoT) and Industry 4.0, modern factory automation systems demand flexible, reliable, and scalable wireless communication and data acquisition (DAQ) solutions. The ICP DAS USA’s ZT Series of ZigBee Alliance based converters and I/O modules provides a cutting-edge answer to these needs, enabling unprecedented system visibility and operational efficiency through seamless Supervisory Control and Data Acquisition (SCADA) integration.
The Power of ZigBee in Industrial Environments
The ICP DAS USA’s ZT Series harnesses the power of the ZigBee standard, an open, global specification based on IEEE 802.15.4. ZigBee operates in the ISM radio bands, defining a low-power, inexpensive, and self-organizing mesh network ideal for industrial control and embedded sensing. These features are crucial in challenging factory environments where traditional wiring is difficult or cost-prohibitive.
The ZT Series goes beyond basic connectivity. It is fully compliant with the RoHS Directive and the IEEE802.15.4 standard, ensuring environmental responsibility and international compatibility. A key advantage is the support for multiple network topologies—mesh, star, and ad-hoc—which enhances network resilience. If one path is blocked, the mesh network automatically finds an alternative route, ensuring uninterrupted data transmission over distances up to 700 meters (Line of Sight, LOS). The system can also support a massive network of up to 65,535 nodes, making it scalable for any size of industrial application.
SCADA Integration and System Status Monitoring
The core of the ZT Series solution involves a powerful hub for control and data logging. The ZT-2570 host repeater acts as the network’s ZigBee Coordinator (Master), connected to a central computing system, often a laptop or industrial PC, running Indusoft SCADA software. This setup provides a unified platform for monitoring and data acquisition across the entire operation.
Key Components in the Wireless Network:
–ZT-2570 (Master/Coordinator): This multi-interface converter facilitates the crucial link between the industrial network and the SCADA system, supporting RS-232/RS-485/Ethernet to ZigBee conversion. It initializes and manages the entire wireless network routing.
–ZT-2571 (Slave/Router): These slave converters function as ZigBee Routers, extending the wireless range and connecting various field devices. One ZT-2571 typically connects to a VPD-133-H2 Touch Screen PLC (Programmable Logic Controller), which operators use for input data and local control. Another ZT-2571 can connect to legacy serial I/O modules and racks, effectively bringing existing equipment into the modern wireless network.
–ZT-2060 and ZT-2053 (I/O Modules): These dedicated data acquisition modules gather critical plant-floor information. The ZT-2060 handles both digital input and relay output (DO), offering essential control functions. The ZT-2053 provides numerous digital input (DI) channels for status monitoring, such as limit switches and sensor outputs.
Future-Proofing with Wireless Extension
One of the most compelling benefits of ICP DAS USA’s ZT Series is its ability to extend existing infrastructure. In older RS-485/RS-232 networks, expanding connectivity often faces roadblocks like physical building structures, complex wiring problems, or high installation costs.
The ZT Series bypasses these traditional hurdles, allowing users to effortlessly upgrade their network wirelessly. By integrating ZT components, businesses can extend their network to new or remote devices quickly and cost-effectively, ensuring their industrial control system remains agile and responsive to changing demands. This modular, wireless approach offers a superior alternative to costly and rigid wired installations, providing a truly flexible and scalable Industrial Internet of Things platform for the modern factory.
Vehicle Monitoring Systems
M2M solution for In-Vehicle monitoring – GT-540P
M2M applications are the ideal answer for the demands of wide range of fields because wireless transmission makes it easy for devices to communicate to each other. Wireless is especially helpful in mobile monitoring systems where instant alarm functions are required.
Transportation management and tracking systems are getting more and more important in modern graphic developed logistics. When goods in transit get stuck in abnormal situations, how and when logistic companies actively gather information and implement necessary reactions are key points that minimize possible losses. In this video, we will present a remarkable solution – the GT-540P is a GPRS remote communication and GPS positioning and monitoring system which features 6 digital inputs, 2 digital outputs, and 1 analog output built in to conduct real time data collection and emergency reaction. You can expand memory storage through the micro SD slot, the GT-540P supports cards up to 2GB. The GT-540P supports both RS-232 and RS-485 communication interfaces to seamlessly communicate with most industrial instruments.
Normally, when vehicles are traveling, the drivers rely on mobile communication to talk to the office staff and control center. With GT-540P installed, based on its highly reliable GPS positioning and monitoring system, the supervisors can obtain the present location and real time status of cars directly through the screens at the control center at any time. M2M applications are always the ideal answer for the demands of a wide range of fields because wireless transmission has no wiring troubles, especially in mobile monitoring systems, where instant alarm functions are required. Drivers must always concentrate on their driving, even when unexpected situations occur, like when a door gets opened or is loose, delivery freezer temperature is out of range, or a tow truck lift is not in the proper place. When these things occur, it will issue a warning signal to the driver immediately.
These conditions will also be recorded and sent automatically by SMS or E-mail to the phone and mailboxes of the relevant personnel. The control center can keep track of the status of the transportation team, and the carriage of goods. If you have any questions, or would like more information about M2M products, please feel free to contact us.
Parking Automation
As the number of vehicles increasing year by year, parking becomes a global issue especially in dense urban area. In addition to providing adequate number of parking spaces, it’s also crucial to optimize the use of parking spaces by guiding drivers quickly finding vacant spaces within a parking facility.
ICP-PDAS WISE-7902 controller, together with the high-speed FR-2054T FRnet modules distributed all over the parking facility, offer a total solution that is perfect for large-scale parking facilities. With help of sensors and lights installed on each space, the system will guide drivers directly to the vacant parking spaces signified by auto-lighting flashing light. In addition, with I/O counter function, it is capable of producing occupancy statistic, trend and flow rates, etc., for analyses and reports. WISE also support Modbus TCP; the I/O information received by on-site controllers will be transmitted to control center in no time, therefore, achieves real time monitoring and remote management for entire parking facility.Benefit:
WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
Support Modbus TCP Protocol that enables seamless integration with SCADA software.
WISE-7902 controller equips with schedule function that enables automatically shut down equipment to save electricity during off-hours or at any scheduled time.
FRnet IO modules features distributed control, expandable and simple wiring; it is especially suitable for large-scale systems.