The /PET-7202 is a multi-function module with 3-channel analog inputs, 6-channel digital inputs and 3-channel relay outputs. It provides various programmable analog inputs (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA and 4 ~ 20 mA). Each analog input is allowed to configure a proper range with 240 Vrms high voltage protection. Each analog input can be programmed to accept current or voltage as input/output depending upon the position of corresponding jumper. The PET-7202 is fully RoHScompliant and has qualification for 4 kV ESD protection as well as 2500 VDC intra-module isolation.
| Software | |
| Built-In Web Server | Yes |
| Web HMI | Yes |
| I/O Pair Connection | Yes |
| Communication | |
| Ethernet Port | 2 x RJ-45, 10/100 Base-TX, Swtich Ports |
| PoE | Yes |
| Protocol | Modbus/TCP, Modbus/UDP |
| Security | ID, Password and IP Filter |
| Dual Watchdog | Yes, Module (0.8 second), Communication Programmable over DCON |
| LED Indicators | |
| L1 (System Running) | Yes |
| L2 (Ethernet Link/Act) | Yes |
| DI/DO Status | Yes |
| PoE Power | Yes |
| 2 Way Isolation | |
| Ethernet | - |
| I/O | 2500 VDC |
| EMS Protection | |
| ESD (IEC 61000-4-2) | 4 kV Contact for Each Terminal and 8 kV Air for Random Point |
| EFT (IEC 61000-4-4) | +/-4 kV for Power |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| Power Requirements | |
| Reverse Polarity Protection | Yes |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Powered from PoE | Yes, IEEE 802.3af, Class1 |
| Consumption | 4.1 W (Max.) |
| Mechanical | |
| Dimensions (W x L x H) | 76 mm x 120 mm x 38 mm |
| Installation | DIN-Rail or Wall mounting |
| Environmental | |
| Operating Temperature | -25°C ~ +75°C (-13°F ~ +167°F) |
| Storage Temperature | -30 C ~ +80 C (-22°F +176°f) |
| Humidity | 10 ~ 90% RH, non-condensing |
| Analog Input | |||
| Channels | 3 (Differential) | ||
| Type | +/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V +0 mA ~ +20 mA, +/-20 mA, 4 ~ 20 mA (jumper selectable) | ||
| Individual Channel Configuration | Yes | ||
| Resolution | 16-bit | ||
| Sample Rate | Normal Mode | 10 Samples/Second (Total) | |
| Fast Mode | 50 Samples/Second (Total) | ||
| Accuracy | Normal Mode | +/-0.1% | |
| Fast Mode | +/-0.5% or better | ||
| Zero Drift | +/-20 V/°C | ||
| Span Drift | +/-25 ppm/°C | ||
| Overvoltage Protection | 240 Vrmse | ||
| Overcurrent Protection | 50 mA max. at 110 VDC/VAC max. | ||
| Input Impedence | Voltage | 2 M | |
| Current | 125 | ||
| Common Mode Rejection | 86 dB Min. | ||
| Normal Mode Rejection | 100 dB | ||
| Open Wire Detection | Yes, for 4 ~ 20 mA only | ||
| Virtual Channel to Channel Isolation | +/-400 VDC | ||
| Digital Input/Counter | |||
| Chanels | 6 | ||
| Contact | Wet Contact | ||
| Sink/Source (NPN/PNP) | Sink/Source | ||
| On Voltage Level | +10 VDC ~ +50 VDC | ||
| Off Voltage | +4 VDC Max. | ||
| Input Impedence | 10 K, 0.5W | ||
| Counters | Channels | 6 | |
| Max. Count | 4,294,967,285 (32 bits) | ||
| Max. Input Frequency | 100 Hz | ||
| Min. Pulse Width | 5 ms | ||
| Overvoltage Protection | +70 VDC | ||
| Power Relay | |||
| Channels | 3 | ||
| Type | Power Relay, Form A (SPST N.O.) | ||
| Operating Voltage Range | 250 VAC/30 VDC | ||
| Max. Load Current | 5.0A/channel at 25°C | ||
| Operate Time | 6 ms (Typical) | ||
| Release Time | 3 ms (Typical) | ||
| Electrical Life (Resistive load) | VDE: | 5 A @ 250 VAC 30,000 ops (10 ops/minute) at 75°C. | |
| 5 A @ 24 VDC 70,000 ops (10 ops/minute) at 75°C. | |||
| UL: | 5 A @ 250 VAC/24 VDC 6,000 ops. | ||
| 3 A @ 250 VAC/24 VDC 100,000 ops. | |||
| Mechanical Life | 20,000,000 ops. at no load (300 ops./minute). | ||
| Intra-module Isolation, Field to Logic | 3750 VDC | ||
| Power-on- Value | Yes, Programmable | ||
| Safe Value | Yes, Programmable | ||
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *