NSM-206FCS-T

The NSM-206FCS-T has officially been phased out and no longer available. The suggested replacement is NSM-206AFCS-T

The NSM-206FCS (SC Connector; Single-mode) is an unmanaged, 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It uses Ethernet for transmitting a signal up to 15 Km, and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion. The NSM-206FCS operates at full duplex mode. In full duplex mode, range is 15 Km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fiber cables. The NSM-206FCS can extend your LAN in a daisy chain configuration. Please refer to User's Manual. NSM-206FCS provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the NSM-206FCS's power needs.

• Automatic MDI / MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 1.6 Gbps high performance memory bandwidth
• Redundant Power Inputs +10 ~ +30V DC
• Power failure alarm by relay output
• Supports operating temperatures from 0°C ~ +70°C
• IP20, rugged high-strength metal case
• DIN-Rail; Wall Mounting