The M-7017 is an 8-channel voltage and current input
module. The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/HMI software and PLCs.
| Analog Input | |
| Input Channels | 8 differential |
| Input Type | ±150mV, ±500mV , ±1V, ±5V, ±10V ±20mA (requires optional external 125 ohm resistor) |
| Resolution | 16-bit |
| Sampling Rate | 10 Samples/ Second |
| Accuracy | ±0.1% |
| BandWidth | 15.7 Hz |
| Zero drift | ±20uV/°C |
| Span drift | ±25ppm/°C |
| Input Impedance | 20M Ohms |
| Common Mode Rejection | 86dB min |
| Normal Mode Rejection | 100dB |
| Over voltage Protection | ±35V(P-P) |
| Intra-module Isolation, Field to Logic | 3000 VDC |
| Interface | |
| Interface | RS-485 |
| Format | N, 8, 1 |
| Baud Rate | 1200 ~ 115200bps |
| LED Display | |
| 1 LED | As Power / Communication Indicator |
| 1 LED | Power |
| Input | +10 to +30VDC |
| Power Consumption | 1.3W |
| Protocol | |
| Support Modbus and DCON Protocol | Yes |
| Watchdog | Yes, Module, Communication (Programmable over DCON) firmware version B300 and later |
| Environment | |
| Operating temperature | -25 to 75°C |
| Storage temperature | -40 to 85°C |
| Humidity | 5 to 95% RH, non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
Data Sheet
Internal I/O Structure
PIN Assignment
Wire Connection
Free EZ Data Logger Software
Add a review
Your email address will not be published. Required fields are marked *