| Share On: | |
|---|---|
| Categories: | M-7000 Modbus RTU Remote Data Acquisition Modules | M-7000 Modbus RTU Remote Data Acquisition Modules |
| Review: | Write your review |
| Resources: |
The M-7051D device is a network data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLCs.
| Digital Input | |
| Channels | 16 |
| Input Type | Dry Contact(Source), Wet Contact(Sink, Source) |
| Dry Contact | Off Voltage Level : open |
| On Voltage Level : close to GND | |
| Effective Distance | 500M max. for Dry Contact |
| Wet Contact | Off Voltage Level : +4V max. |
| On Voltage Level : +10V to +50V | |
| Input Impedance | 10K Ohms, 0.5W |
| Counters | channels : 16 |
| Max. Counts: 16-bit (65535) | |
| Max. Input Frequency : 100Hz | |
| Min. Pulse Width : 5ms | |
| Over-Voltage Protect | 70VDC |
| Photo-Isolation | 3750Vrms |
| Interface | |
| Interface | RS-485 |
| Format | N, 8, 1 |
| Baud Rate | 1200 ~ 115200bps |
| LED Display | |
| 1 LED as Power/ Communication indicator | |
| 16 LEDs as Digital Input indicators (for M-7051D) | |
| Power | |
| Input Voltage Range | 10~30VDC |
| Power Consumption | 0.6W (M-7051) / 1.5W (M-7051D) |
| Protocol | |
| Support Modbus and DCON Protocol | Yes |
| Environment | |
| Operating Temperature | -25 to 75°C |
| Storage Temperature | -40 to 85°C |
| Humidity | 5 to 95% RH, non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *