I-7561

$0.00

USB to RS-232 / RS-422 / RS-485 Isolated Converter, supports Windows 10/7/Vista/XP & Linux operating systems. Includes CA-USB18 USB cable. Supports operating temperatures between -25°C to 75°C (-13°F to 167°F). I-7561 has been phased out and replaced by I-7561U.

Product Unavailable

Share On:
Categories:	USB Converters \| RS-232/422/485 Converters \| USB Converters \| RS-232/422/485 Converters
Review:	Write your review
Resources:	Quick Start User's Manual Data Sheet Drivers Hardware CE Certification FCC Certification

This product has been phased out and will no longer be available. This item is replaced by the I-7561U.

I-7561 application image with data acquisitin modules and InduSoft SCADA software

The I-7561 is a cost-effective module for transferring serial data via USB. You can connect your serial devices to systems that use a USB interface. There is one RS-232/422/485 port where the I-7561 could act as a RS-232 to USB converter, RS-485 to USB converter, and RS-422 to USB converter. A "Self-Tuner" chip auto-tunes the Baud Rate and data format to the RS-485 networks. The I-7561 module is self-powered through USB. The I-7561 acts as a RS-232 to USB converter, an RS-485 to USB converter, and an RS-422 to USB converter.

Includes CA-USB18 Cord.

Fully Compliant with the USB 1.1/2.0/3.0
3000 VDC Isolation Protection on the RS-232/422/485 side
ESD Protection for the RS-232/422/485 Data Line
Transmission speed up to 921.6 kbps (For I-7561U)
No External Power Supply required
Automatic RS-485 Direction Control
Operating Temperatures, -25°C ~ +75°C (-13°F ~ 167°F)
DIN-Rail Mounting

FCC RoHS WEEE

Specifications

Interface
USB		Compatibility: USB 1.1 and 2.0 standards
Serial Interface	RS-232	TxD, RxD, GND	The RS-232, RS-422 and RS-485 cannot be used simultaneously
	RS-422	TxD+, TxD-, RxD+, RxD
	RS-485	Data+, Data-
2-wire cabling/4-wire cabling		Belden 8941 (2P twisted-pair cable)/Belden 8942 (4P twisted-pair cable), if different cables are used, the transmission distance may change
RS-422/485 Transfer Distance		Max. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps
Maximum Supported RS-485 Devices		256 (Without repeater)
Self-Tuner Asic Inside (RS-485)		Yes
Speed		300 ~ 115200 bps
Connection	RS-232/422/485	Removable 10-Pin Terminal Block
	USB	Type B
Cable Included		CA-USB18 (1.8 m Cable) x 1
LED Indicators
Power		Yes
Power
Input Voltage Range		+5 VDC From USB
Power consumption		0.1A @ 5V = 0.5W, +/- 5%
Casing
Mechanical		Plastic
Flammability		UL 94V-0 materials
Dimensions		61 mm x 33 mm x 15 mm
Installation		DIN-Rail
Environment
Operating Temperature		-25°C ~ 75 °C
Storage Temperature		-30°C ~ 75 °C
Ambient Relative Humidity		10% ~ 90% RH, non-condensing

1 review for "I-7561"

– 0000-00-00 00:00:00

Works perfectly for interfacing with Watlow EZ-Zone controls and the F4. Fast and reliable.

– 0000-00-00 00:00:00

Works perfectly for interfacing with Watlow EZ-Zone controls and the F4. Fast and reliable.

Add a review

Your email address will not be published. Required fields are marked *

Overall ratings

Select Rating *

You must be signed in to review! Click here to sign in.