I-7540D-MTCP

I-7540D-MTCP is a CAN to Ethernet / Modbus TCP / Modbus RTU Converter. It is helpful for exchanging data between Modbus devices and CAN devices. I-7540D-MTCP is a Modbus TCP server and acts as slave device in Modbus RTU networks. It supports four communication modes: Modbus TCP, Modbus RTU, CAN-Ethernet Conversion and Pair connection.

The major function of the I-7540D-MTCP is a CAN to Modbus TCP/RTU gateway. It allows Modbus TCP/RTU devices to communicate with CAN devices on a CAN network. I-7540D-MTCP supports the function codes 0x03/0x04/0x10 of Modbus TCP/RTU for reading and writing of CAN messages. The device supports a transparent, protocol-independent transfer of the CAN messages, thus allowing its implementation into a wide range of possible applications. The CAN-Modbus Converter can be used with various higher layer CAN protocols (e.g. CANopen, DeviceNet or other proprietary protocols). These application diagrams show the application architecture for the I-7540D CAN-Modbus Converter.

• Features:
  • 80186-80 Embedded CPU, or compatible
  • Ethernet Protocols, TCP,UDP,IP,ICMP,ARP
  • COM driver support interrupt & 1K QUEUE Input & Output buffer
  • Provide 200 CAN frames buffer in CAN to Modbus Mode
  • NXP 82C 250 CAN Transceiver
  • Support both CAN specification 2.0A and 2.0B
  • Max transmission speed up to 1M bps for CAN and 115.2kbps for RS-232 & RS-485
  • Max transmission distance of CAN over 1000m (follow CAN specification)
  • 7-segment LED display to Module IP, RS-232 baud rate, CAN configuration…
  • CAN Error/Tx/Rx LED indicator
  • Software configurable CAN and RS-232 communication parameters
  • Firmware updated from COM1 or Ethernet port
  • Support Web Configuration
  • Support maximum 24 Ethernet clients connection
  • Support function code 0x03/0x04/0x10 of Modbus TCP/RTU command for reading and writing CAN message
  • Provide the transparent communication between the CAN devices via Ethernet
  • Support 30 specific CAN IDs in the Modbus TCP/RTU mode
    
    
  • Applications:
    • Factory Automation
    • Building Automation
    • Home Automation
    • Control Systems
    • Monitoring Systems
    • Vehicle Automation
      
      
      
  • CAN bus Power Meter Solution
    • The PM-213x-CAN series power meter provides the CAN bus interface for users to easily gather the real-time power consumption information in their CAN applications. The PM-213x-CAN provides the Auto-Response mode which responses messages at regular intervals automatically. It makes the communication more efficient when collecting a lot of remote power information. The polling mode offers the precise information of every step required by the monitors. In addition, the PM-213x-CAN also owns the arbitration mechanism which can avoid data collision and error detection.
      
      
      
  • Utility:
    • Operation mode configuration
    • IP 、 Gateway 、 Mask configuration
    • CAN bus Baud rate configuration
    • CAN BTR0 and BTR1 configuration
    • CAN acceptance filter configuration
    • CAN 2.0A or 2.0B specific selection
    • Error code Responded selection
    • Easy test to transmit/receive CAN messages
    • Easy test to Modbus TCP/Modbus RTU command