| Share On: | |
|---|---|
| Categories: | DCS Modules |
| Review: | Write your review |
| Resources: |
The F-8015 is a 16-bit, 8-channel RTD input module that features programmable input range on all channels. This module has ±0.05% accuracy for highly accurate application. Besides, the F-8015 provides 3000VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.
| Feature | ||
| Redundant | Yes (Switching time < 100us) | |
| Over Voltage Protection | Yes | |
| Termination board break off detection | Yes | |
| Open Wire Detection | Yes | |
| LED indicator | 1 RUN, 1 ACT, 1 DUX | |
| RTD Input | ||
| Number of channels | 8 | |
| Type | Pt-100 | IEC 60751 ITS90 (0.03851 Ω/Ω/°C) |
| JPt-100 | JIS C 1604 (0.03916 Ω/Ω/°C) | |
| Pt-1000 | IEC 60751 ITS90 (0.03851 Ω/Ω/°C) | |
| Temperature Range | Pt100 | -200 ~ +850 |
| JPt-100 , Pt1000 | -200 ~ +630 | |
| Maximum Allowable Input Voltage | 120 VDC | |
| Resolution | 16 bit | |
| Sampling Rate | 8 Samples/sec (Total) | |
| Accuracy | ±0.05% FSR (±250 mΩ) | |
| Zero Drift | ±0.5 μV/°C | |
| Span Drift | ±20 ppm/°C | |
| Common Mode Rejection | 106 dB | |
| Normal Mode Rejection | 90 dB | |
| Input Impedance | 20 MΩ | |
| Data Range | -2500 ~ 12500 | |
| Isolation | 3000 VDC | |
| Certification | ||
| EMC | EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4 | |
| General | ||
| Termination board | DN-RTD-M | |
| Maximum power consumption | 1 W | |
| Operating temperature | -25°C~ +75°C | |
| Humidity | 5 ~ 95 % RH, Non-condensing | |
| Weight | 300 g | |
| Dimensions (W x L x H) | 30mm x 85mm x 115mm | |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *