| Share On: | |
|---|---|
| Categories: | DCS Modules |
| Review: | Write your review |
| Resources: |
The F-8028CH is a 16-bit, 8-channel analog output module. It provides digital to analog converter controlled by the system module to convert the digital data into output signals. Users can specify the start up and safety value through configuration software. Moreover, this module has ±0.05% accuracy for highly accurate application. In addition to current output, F-8028CH is also built-in HART master interface to remotely maintain devices via HART. Besides, the F-8028CH provides 3000VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.
| Feature | ||
| HART interface | Yes, supports HART master | |
| Redundant | Yes (Switching time < 1 ms) | |
| Termination board break off detection | Yes | |
| Open Wire Detection | Yes | |
| Power-On Value | Yes | |
| Safety Value | Yes | |
| Accuracy | 1 RUN, 1 ACT, 1 DUX | |
| Analog Output | ||
| Number of channels | 8 | |
| Type | 4 ~ 20 mA, currnet sourcing | |
| Maximum Allowable Output Range | ±25% (0 ~ 24 mA) | |
| Resolution | 16 bit | |
| Output Response Time | <200 μS | |
| Accuracy | ±0.05% FSR | |
| Zero Drift | ±0.2 μV/℃ | |
| Span Drift | ±25 ppm/℃ | |
| Output Capacity | 0 ~ 750 Ω | |
| Data Range | -2500 ~ 12500 | |
| Isolation | 3000 VDC | |
| Certification | ||
| EMC | EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4 | |
| General | ||
| Termination board | DN-AIO-M | |
| Maximum power consumption | 0.5 W + 10W1 | |
| Operating temperature | -25°C ~ +75°C | |
| Humidity | 5 ~ 95 % RH, Non-condensing | |
| Weight | 300 g | |
| Dimensions (W x L x H) | 30 mm x 85 mm x 115 mm | |
1. The power consumption depends on the load.
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *