| Share On: | |
|---|---|
| Categories: | Termination Boards | DCS Modules |
| Review: | Write your review |
| Resources: |
The DN-DO-16DR-A & DN-DO-16DR-B are termination boards with relay (Form C, SPDT) output. The DN-DO-16DR-A is used for digital output channel 0~15, and the DN-DO-16DR-B is used for digital output channel 16~31. These boards offer 2 output for each channel to extend control logic due to the Form C relay, it can be positive (N.O.) or negative (N.C.) logic output or both. In addition, each channel is built-in two varistors on N.O. and N.C. channel to protect against high-voltage transients and surges to the control loop.
| Model | DN-DO-16DR-A | DN-DO-16DR-B |
| Digital Output | ||
| Type | Form C Relay | |
| Relay Contact | ||
| Contact configuration | SPDT | |
| Rated current/Max. peak current | 6 A/10 A | |
| Rated voltage/Max. switching voltage | 250 VAC/400 VAC | |
| Minimum switching Load | 300 mW | |
| Mechanical life | 20 x 106 | |
| Operate/release time | 8/5 ms | |
| Relay Coil | ||
| Voltage input | 24 VDC ± 10% | |
| Current consumption | 400 mA@24 VDC | |
| Varistor Protection | ||
| Max. applied voltage (Continuous) | AC: 300 Vrms DC: 385 VDC |
|
| Rated voltage | 470 Vrms | |
| General | ||
| Dimension (W x L x H) | 126.6 x 274.6 x 25.5 mm | |
| Mounting | 35 mm DIN Rail, Wall | |
| Ambient Temperature | -25 ~ 75 °C | |
| Humidity | 5 ~ 95 % RH, Non-condensing | |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *