| Share On: | |
|---|---|
| Categories: | VPD Expansion Boards |
| Review: | Write your review |
| Resources: |  Data Sheet |
* Only for VPD-132/133
The XV116 provides 5 channels for digital input, as well as 6 Form A relay output channels. In addition, either sink- or source-type digital input can be selected via wire connections. All input channels can be used as 16-bit counters. The XV116 also provides options for configuring power-on and safe digital output values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise immunity capabilities in industrial environments.
| Digital Input/Counter | |||
| Input Channels | 5 | ||
| Type | Dry Contact | - | |
| Wet Contact | Sink/Source | ||
| On Voltage Level | Dry Contact | - | |
| Wet Contact | +3.5 ~ +50 VDC | ||
| Off Voltage Level | Dry Contact | - | |
| Wet Contact | +1 VDCMax. | ||
| Input Impedance | 10 KΩ, 0.5 W | ||
| Counters | Channels | 5 | |
| Max. Count | 16-bit (65535) | ||
| Max. Input Frequency | 100 Hz | ||
| Min. Pulse Width | 5 ms | ||
| Overvoltage Protection | 70 VDC | ||
| Relay Output | |||
| Channels | 2 (Channel 0,1) | 4 (Channel 2 ~ 5) | |
| Type | Signal Relay | Power Relay | |
| Form A Relay |
Contact Rating | 2 A @ 30 VDC 0.24 A @ 220 VDC 0.25 A @ 250 VAC |
6 A @ 35 VDC 6 A @ 240 VAC |
| Min. Contact Load | 10 mA @ 20 mV | 100 mA @ ≧12 V | |
| Contact Material | Silver Nickel, Gold-covered | Silver Cadmium Alloy | |
| Operate Time | 3 ms (typical) | 5 ms (typical) | |
| Release Time | 4 ms (typical) | 1 ms (typical) | |
| Mechanical Endurance | 108 ops. | 30 X 106 ops. | |
| Electrical Endurance | 2 X 105 ops. | 1 X 105 ops. | |
| Power-on Value | Yes | ||
| Safe Value | Yes | ||
| Communication | |
| Interface | RS-232/TTL |
| Format | N, 8, 1 |
| Baud Rate | 115200 bps |
| Protocol | Modbus/RTU |
| Dual Watchdog | Yes, Module (2.3 seconds), Communication(Programmable) |
| Isolation | |
| Intra-module Isolation, Field-to-Logic | 3750 VDC |
| EMS Protection | |
| ESD (IEC 61000-4-2) | +/-4kV Contact For Each Terminal |
| +/-8kV Air For Random Terminal | |
| Power | |
| Reverse Polarity Protection | - |
| Powered from Terminal Block | 5 VDC |
| Consumption | 1.2 W Max. |
| Mechanical | |
| Dimensions (W x L x H) | 59 mm x 82 mm x 13 mm |
| Environment | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -40 ~ +85°C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
Add a review
Your email address will not be published. Required fields are marked *