| Share On: | |
|---|---|
| Categories: | Internet of Things (IoT) | WISE Data Acquisition Controllers |
| Review: | Write your review |
| Resources: |
Ethernet pairs. In addition, WISE-7517M-10 also has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easier and total costs of cable and switch are significantly reduced.
By integrating with IF-THEN-ELSE rule engine, WISE-7517M-10 provides powerful functions such as I/O Monitoring/Control, Counter, Timer, Schedule, E-mail sending & CGI Command sending for use in various industrial applications. WISE-7517M-10 also supports Modbus TCP and MQTT protocols to make seamless integration with SCADA, IT and IoT (Internet of Things) system.
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.
Analog Input
Channels
10 differential or 20 single-ended (Note1), software selectable
Type
±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V
±20 mA ,0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable)
Resolution
16-bit
Sampling Rate
10 Samples/Second (Total)
Accuracy
±0.1 %
Zero Drift
±20 μV/°C
Span Drift
±25 ppm/°C
Overvoltage Protection
Differential
240 Vrms
Single-ended
150 Vrms
Common Voltage Protection
±200 VDC
Overcurrent Protection
Yes, 50 mA at 110 VDC
Virtual Channel to Channel Isolation
Yes, 400 VDC
Open Wire Detection for 4 ~ 20 mA
Yes
Input Impedance
Voltage
2 MΩ (Differential), 1 MΩ (Single-ended)
Current
125Ω
Common Mode Rejection
86 dB Min.
Normal Mode Rejection
100 dB
Note1: Differential mode can be used for voltage input and current input. Single-Ended mode can be used for voltage input only.
Communication
Ethernet Port
2 x RJ-45, 10/100 Base-TX, Swtich Ports
PoE
Yes
Protocol
Modbus TCP, MQTT
LED Indicators
for System Running
Yes
for Ethernet Link/Act
Yes
for I/O Channel Status
Yes
for PoE Power
Yes
2-Way Isolation
I/O
2500 VDC
EMS Protection
ESD (IEC 61000-4-2)
±4 kV Contact for Each Terminal and
±8 kV Air for Random Point
EFT (IEC 61000-4-4)
±2 kV for Power Line
Surge (IEC 61000-4-5)
±2 kV for Power Line
Power
Reverse Polarity Protection
Yes
Powered from Terminal Block
12 ~ 48 VDC
Powered from PoE
Yes, IEEE 802.3af, Class1
Consumption
3.7 W (Max.)
Mechanical
Dimensions (L x W x H)
120mm x 97mm x 42mm
Installation
Wall mounting
Environment
Operating Temperature
-25 °C ~ +75 °C
Storage Temperature
-30 °C ~ +80 °C
Humidity
10 ~ 90% RH, non-condensing
Functions
Rule Configuration Website
Access Web server on WISE controllers to edit and upload logic rules through web browser.
72 IF-THEN-ELSE Logic Rules
3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions
48 Internal Registers
Hold temporary variables and read/write data.
24 Timers
Delay / Timing functions.
24 Schedules
Setup prescheduled routine tasks.
24 Emails
Send Email messages to pre-set Email receivers.
24 CGI Commands
Send pre-set CGI commands.
24 Recipes
Set up THEN/ELSE action groups.
8 P2P remote modules
Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol
Real time control and monitoring I/O channels and system status of controllers via SCADA software.
MQTT Protocol
Real time message publish/subscribe mechanism for I/O channels and system status via IT/IoT software.
IF Conditions
AI Channel
=, >, <, ≥, ≤ (value)
Internal Register
=, >, <, ≥, ≤ (value)
Timer
Timeout, Not Timeout
Schedule
In Range, Out of Range
P2P
DI, AI, DI counter, DO counter, IR
Rule Status
Enable, Disable
THEN / ELSE Actions
Internal Register
Change the value
Timer
Start, Reset
Schedule
Enable, Disable
Send
MQTT message
Send
CGI Commands
Send
Recipe
Execute
P2P
DO(On/Off), AO, IR
Rule Status
Enable, Disable
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *