PM-2134-100-CAN

$0.00

4 Loops 1 Phase Compact Smart Meter /CT:4pcs,Φ10mm（0-60A)/English/CAN bus , Modbus RTU. Supports input types: Vrms, Irms, kW, kWh, kVA, kVAh, kVAR, kVARh, and PF.

Product Unavailable

Share On:
Categories:
Review:	Write your review
Resources:	User's Manual Data Sheet Dimensions Quick Start Software How to Use ISaGRAF PACS with PM-213x Power Meter Table Free EZ Data Logger Software CE Certification FCC Certification

*** The PM-2xxx series model has been phased out and replaced with the PM-3xxx series model ***

Installs with Simple Clip-on CT

It's always difficult but crucial to the supervisors to figure out how much energy is consuming. ICP DAS brings the most powerful, cost effective, advanced Compact Power Meters, PM-213X series, to the markets.

With its high accuracy (1%, PF=1), the PM-213x series products can be applied both on low voltage primary side and/or medium/high voltage secondary side and enable the users to obtain in real time the reliable and accurate energy consumption readings from the monitored equipments while in operation. These compact size and cost effective Power Meters are equipped with revolutionary wired clip-on CT (various types support input current up to 200A) and standard Modbus communication RS-485 protocol for easy deployment. It works with input voltages ranging 10V ~ 500V, supporting a wide range of applications.

ICP DAS offers PM-213X family in a full range of Single-phase and Three-phase compact power meters for power monitoring. The products offer a rich feature set combined with easy-to-integrate communications.

True RMS energy and power parameters measurement in compact size.
Easy wiring for on-line installation.
RS-485 communication supported Modbus RTU protocol , CAN Bus Communication supported Compatible with CAN specification 2.0B.
Wh accuracy better than 1%(PF=1).
With wired clip-on CT (various types support input current up to 200A).
LED pulse output.

Power Meter Selection Guide:

Specifications

Model	PM-2134
Input Voltage	10 - 300 V
Input Current	CT Φ10 mm (60 A), CT Φ16 mm (100 A), CT Φ24mm (200 A)
Aux Power	DC 10 - 30 V
Frequency	60/50 Hz
Starting I	<0.025A
Wiring diagram	1-phase 4-channel
Power Parameters Measures	V1, V1, V2, V2 I 1, I 2, I 3, I 4 kW1, kW2, kW3, kW4 kVA1, kVA2, kVA3, kVA4 kvar1, kvar2, kvar3, kvar4 PF1, PF2, PF3, PF4 kWh1, kWh2, kWh3, kWh4 kVAh1, kVAh2, kVAh3, kVAh4 kvarh1, kvarh2, kvarh3, kvarh4
Communication	RS485, half duplex isolated Baud Rate：9600, 19200, 38400 Protocol：Modbus-RTU
kWh Accuracy	0.1%(PF=1) better than IEC62053-21
Dimension	78(L) × 35(W) × 99(H) mm
Operating Temperature	-10 °C ~ 70 °C
Installation	Rail-mounted

Installs Simple Clip-on CT

Clip-on CT

Wiring Diagram

Model Explanation

PM-2134: 4 Loops 1 Phase Compact Smart Meter

PM-2134

CT Size (measurement) Explanation

100: CTΦ10mm (0~60A)

CT01

Add a review

Your email address will not be published. Required fields are marked *

Overall ratings

Select Rating *

You must be signed in to review! Click here to sign in.