| Share On: | |
|---|---|
| Categories: | Programmable Serial to Ethernet Device Servers | Programmable Serial to Ethernet Device Servers |
| Review: | Write your review |
| Resources: |  User's ManualQuick StartData Sheet SoftwareCE CertificationFCC Certification
|
The PDS-5105D-MTCP is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway", that are designed for linking RS-232/485 devices to an Ethernet network. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PDS-5105D-MTCP into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high flexibility, the PDS-5105D-MTCP is able to meet the demands of every network-enabled application.
The PDS-5105D-MTCP includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in, high-performance MiniOS7 boots the PDS-5105D-MTCP up in just one second and gives you fastest responses.
The PDS-5105D-MTCP also works as a Modbus TCP to RTU/ASCII gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.
The PDS-5105D-MTCP is equipped with 1 RS-232/485 port and 9 RS-485 ports. The removable on-board terminal block connector is designed for easy and robust wiring in industrial situations.
The PDS-5105D-MTCP is equipped with a 2-port 10/100Base-Tx Ethernet switch that simplifies network wiring by cascading Ethernet devices. Furthermore, the module features a LAN Bypass function allowing network traffic to be continued between two network segments (Ethernet port1 and port2). In cases where the module is offline due to of software, hardware or power failure, the LAN Bypass function will be automatically activated, and the essential communications on the network can continue operating without interruption.
| System | ||
| CPU | 80186 or compatible (16-bit and 80 MHz) | |
| SRAM | 512 KB | |
| Flash | 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles. | |
| EEPROM | 16 KB | |
| Communication Interface | ||
| Ethernet | 2-Port 10/100 Base-TX Ethernet Switch with LAN Bypass, RJ-45 x 2 (Auto-negotiating, Auto-MDI/MDIX, LED indicator) |
|
| COM1 | RS-232(TxD, RxD, GND)/RS-485(D1+, D1-), Self-tuner ASIC inside, non-isolated | |
| COM2 ~ 10 | RS-485(Dx+, Dx-), Self-tuner ASIC inside, non-isolated | |
| RS-485 | Bias Resistor | Yes, 1 KΩ |
| Node | 254 (max.) | |
| COM Port Format | ||
| Baud Rate | 115200 bps Max. @ 10 Ports, half-duplex, 80% loading | |
| Data Bit | 7, 8: for COM1 and COM2 5, 6, 7, 8: for COM3 ~ COM10 |
|
| Parity | None, Odd, Even, Mark, Space | |
| Stop Bit | 1, 2 | |
| Power | ||
| Protection | Power reverse polarity protection | |
| Power Consumption | 0.18 A @ 24 VDC | |
| Frame GND | Yes (for EMS Protection) | |
| Input Range | +12 ~+48 VDC (non-regulated) | |
| Mechanical | ||
| Dimensions (W x H x D) | 91 mm x 132 mm x 52 mm | |
| Installation | DIN-Rail | |
| Case | Fire Retardant Materials (UL94-V0 Level) | |
| Environment | ||
| Operating Temperature | -25 ~ +75 °C | |
| Storage Temperature | -30 ~ +80 °C | |
| Humidity | 10 ~ 90% RH, non-condensing | |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
Add a review
Your email address will not be published. Required fields are marked *