PCM-CAN200-D

Besides, PCM-CAN200 uses the CAN controller Phillips SJA1000T and transceiver 82C250/251, which provide bus arbitration, error detection with auto correction and re-transmission function. It can be installed in a 5V PCI slot and supported truly “Plug & play”

Applications

• Control System
• Building Automation
• Factory Automation
• Distributed data acquisition

Features

PCI104/PC104+ compliant

9-pin D-sub connector

Compatible with CAN 2.0 parts A and B

Fully compatible with ISO 11898-2 standard

Support CAN bard from 10K to 1M bps

2500 Vrms photo couple isolation on the CAN bus

Built-in jumper to select 120 ohm terminal resister

3KV galvanic isolation

2 independent CAN channels

Direct memory mapping to the CAN controller

Provide VB, VC++, Delphi, BC++ demos

Driver support Windows 98/ME/NT/2K/XP/WinCE and Linux

Hardware Architecture

Software Architecture

RTX Driver

In order to satisfy the users to apply the RTX system, ICPDAS provides the RTX driver for PISO-CAN series CAN card. If users want to combine the CAN communication interface in their time-critical system, the RTX driver of the PISO-CAN series CAN cards can help them to do this easily and quickly. Furthermore, the name and parameters of the APIs in the RTX driver are the same as in the Windows driver. Users don’t need to pay more efforts to study how to use the APIs of the RTX driver if they have used the Windows driver before. The RTX driver increases the additional worth of the PISO-CAN series CAN cards, and satisfies the users to get the highly real-time system. By owing to the feature of high price performance and highly real-time, PISO-CAN series CAN cards will be applied in more wide and more variant CAN applications.

Features：

The name and parameters of the APIs in RTX driver are the same as them in the Windows driver. Users don’t need to learn the new usage if they have used the PISO-CAN series CAN card before.

If the PISO-CAN series CAN card can get the independent IRQ, it supports interrupt function.

Direct I/O control and highly real-time feature

Support Windows2000 SP4, and Windows XP SP2 OS.

Support RTX version 8.0 or later.

Real-time Test：

Platform: Windows XP SP2+PISO-CAN200E

Device: I-7186EXD-CAN with MiniOS7 (single tasking OS)

Send and receive 10000 CAN 2.0B 8-byte messages. Repeat this procedure for 10 times.

Utility

Can be a CAN system monitor tool with CAN cards

It is a good tool to test CAN system

Send/Receive/Record CAN messages.

Provide cyclic transmission function

Record the CAN messages with filtered ID and time stamp

DeviceNet Tools

DeviceNet is a low level network that provides connections between simple industrial devices (sensors, actuators) and higher level devices (controllers). It allows direct peer to peer data exchange between nodes in an organized and, if necessary, deterministic manner. We provides DeviceNet library for users to develop the specific DeviceNet application by PCM-CAN200/200P. In addition, we also provide the DeviceNet diagnosis application tool to monitor and diagnose the DeviceNet message through CAN network. It provides the DeviceNet communication protocol interface to control and analysis the DeviceNet slaves. 

DevcieNet Application Tool Features

• Auto detecting DeviceNet slave devices
• IO monitor
• Message monitor & diagnosis
• Support UCMM capable devices
• Support the Predefined Master/Slave connection set
• Selectable data rates (baud): 125K, 250K, 500K

DevcieNet Master X-Server Features