| Share On: | |
|---|---|
| Categories: | Industrial Ethernet Switches with Fiber Optics with Plastic Cases | Industrial Media Converters (Ethernet - Fiber) |
| Review: | Write your review |
| Resources: |
PoE (PSE) with 1 Fiber port and +24 VDC Input Switch (RoHS)The NS-205PFC is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipment (PSE). It is equipped with +24 VDC to +48 VDC boost for PoE application where +48 VDC power supply is unavailable.
Technology
Standards
IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type
Store & forward; wire speed switching
MAC Addresses
1024
Memory Bandwidth
3.2 Gbps
Frame Buffer Memory
512 Kbit
Flow Control
IEEE 802.3x flow control, back pressure flow control
Ethernet Interface
RJ-45 Ports
10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators
Power, Link/Act, Power Device is detected
Ethernet Isolation
1500 Vrms 1 minute
+/-4 kV ESD Protection
Yes
Fiber Interface (100 Base-FX; SC/ST type)
Multi-Mode
NS-205PFT/FC
NSM-205PFT/FC
NS-205PFT-24V/FC-24V
NSM-205PFT-24V/FC-24V
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 µm
Distance: 2 km, (62.5/125 µm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Min. RX Overload: -8 dBm
Budget: 12 dBm
Single-Mode
NS-205PFCS
NSM-205PFCS
NS-205PFCS-24V/FCS-24V
NSM-205PFCS-24V/FCS-24V
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 µm
Distance: 30 km, (9/125 µm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Min. RX Overload: -5 dBm
Budget: 19 dBm
Single-Mode
NS-205PFCS-60
NSM-205PFCS-60
NS-205PFCS-60-24V/FCS-60-24V
NSM-205PFCS-60-24V/FCS-60-24V
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 µm
Distance: 60 km, (9/125 µm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Min. RX Overload: -5 dBm
Budget: 30 dBm
Power Input
Input Voltage Range
+18 ~ +32 VDC
Power Consumption
0.24 A @ 24 VDC without PD loading;
3.2 A @ 24 VDC with PD full loading;
4.6 A @ 18 VDC with PD full loading
Protection
Power reverse polarity protection
+/-4 kV ESD Protection
Yes
Connector
3-Pin Removable Terminal Block
PoE Technology
PoE Compliance
100% IEEE 802.3af compliant
PoE Classification
PSE (Power Sourcing Equipment)
PoE Voltage
+48 VDC depending on power input
PoE Voltage
Up to 15.4 watts per channel
PoE Operation
Automatic detection and power management
PoE Pin assignments
V+ (Pin 1,2), V- (Pin 3,6)
PoE disconnect mode
DC disconnect
Mechanical
Casing
Plastic (Flammability UL 94V-0)
Dimensions (W x L x H) (Unit: mm)
31 x 157 x 113
Installation
DIN-Rail Mounting
Environment
Operating Temperature
-30 °C ~ +75 °C
Storage Temperature
-40 °C ~ +85 °C
Ambient Relative Humidity
10% ~ 90% RH, non-condensing
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
Data Sheet
Add a review
Your email address will not be published. Required fields are marked *