| Share On: | |
|---|---|
| Categories: | Industrial Ethernet Switches with Fiber Optics with Plastic Cases | Industrial Media Converters (Ethernet - Fiber) |
| Review: | Write your review |
| Resources: |
The NS-205PFC is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PFC makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high distance (up to 60 km) transmissions.
| Technology | |
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
| Processing Type | Store & forward, wire speed switching |
| MAC Addresses | 1024 |
| Memory Bandwidth | 3.2 Gbps |
| Frame Buffer Memory | 512 Kbit |
| Flow Control | IEEE802.3x flow control, back pressure flow control |
| Interface | |
| RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| LED Indicators | Power, Link/Act , 10/100M, Power Device is detected |
| Ethernet Isolation | 1500 Vrms 1 minute |
| +/-6 kV EMS Protection | Yes |
| Fiber Interface (100 Base-FX; SC/ST type) | |
| Multi-Mode (NS-205PFT/FC) |
Multi mode fiber cables:50/125, 62.5/125 or 100/140 μm Distance :2 km, (62.5/125 μm recommended) for full duplex Wavelength : 1300 or 1310nm Min. TX Output:- 20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -32 dBm Max. RX Overload: -8 dBm Budget: 12 dBm |
| Single-Mode (NS-205PFCS) |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm Distance: 30 Km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: - 15 dBm Max. TX Output: -8 dBm Max. RX Sensitivity: -34 dBm Max. RX Overload: -5 dBm Budget: 19 dBm |
| Single-Mode (NS-205PFCS-60) |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm Distance: 60 Km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: - 5 dBm Max. TX Output: 0 dBm Max. RX Sensitivity: -35 dBm Max. RX Overload: -5 dBm Budget: 30 dBm |
| Power Input | |
| Input Voltage Range | +46 ~ +55 VDC for PoE output |
| Power Consumption | 0.08@ 48 VDC without PD loading |
| Protection | Power reverse polarity protection |
| Frame Ground for EMS Protection | Yes |
| Connection | 3-Pin Removable Terminal Block |
| PoE Output | |
| PoE Compliance | 100% IEEE 802.3af compliant |
| PoE Classification | PSE (Power Sourcing Equipment) |
| PoE Voltage | +48 VDC depending on power input |
| PoE Power | Up to 15.4 watts per channel |
| PoE Operation | Automatic detection and power management |
| Mechanical | |
| Casing | Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x H) | 31 mm x 157 mm x 113 mm |
| Installation | DIN-Rail |
| Environmental | |
| Operating Temperature | -30 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
Manual
Add a review
Your email address will not be published. Required fields are marked *