NS-200FT

$0.00

Industrial 10/100 BaseT to 100 BaseFT Fiber Optical Converter *For Multi Mode Use* Supports operating temperatures from -25 to 75°C. Replaced with NS-200AFT-T

Product Unavailable

Share On:
Categories:	Industrial Ethernet Switches with Fiber Optics with Plastic Cases
Review:	Write your review
Resources:	User's Manual PIN Assignment Internal I/O Structure Data Sheet Dimensions Application Diagram CE Certification FCC Certification

The NS-200FT is being phased out and is available while supplies last. It is being replaced by NS-200AFT-T.

The NS-200FT is a Ethernet(10/100Base-TX) to Fiber Optic(100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function.

The NS-200FT operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125μm fiber cables; in half duplex mode, range is 412m with 62.5/ 125μm fiber cables.

It contains "soft start" function with overload protection, high-low voltage protection.

The width of the NS-200FT is just 32.30 mm, so it can be used where space is important.

Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
1.4Gbps high performance memory bandwidth.
Frame buffer memory : 512 Kbit
Integrated look-up engine with dedicated 1 K unicast MAC addresses.
MTBF = 438,000 hours ( Temperature is 25 °)
MTBCF = 525,600 hours ( Temperature is 25 °)
Supports +10~+30Vdc voltage
Reverse Polarity Protection
Supports operating temperatures from 0 ~ +70°C
DIN rail mount for industrial usage

Specifications

Analog Input
Input Channels	8 differential
Input Type	+/-500mV, +/-1V, +/-5V, +/-10V +/-20mA (requires optional external 125ohm resistor)
Resolution	16-bit (Normal Mode) / 12-bit (Fast Mode)
Sampling Rate	10 samples/ second (Normal Mode) / 60 samples/ second (Fast Mode) total
Accuracy	+/-0.1% (Normal Mode) / +/-0.5% (Fast Mode) or better
Band Width	15.7Hz (Normal Mode) / 78.7Hz (Fast Mode)
Zero drift	+/-20uV/°C
Span drift	+/-25ppm/°C
Input Impedance	2M Ohms
Common Mode Rejection	86dB min.
Normal Mode Rejection	100dB
Over Voltage Protection	240 Vrms
4KV ESD Protection	Yes, Contact for each terminal.
Intra-module Isolation, Field to Logic	3000 VDC
Interface
Interface	RS-485
Format	N, 8, 1
Baud Rate	1200 ~ 115200bps
LED Display
1 LED as Power/ Communication indicator
Power
Input	+10 to +30 Vdc
Power Consumption	1.3W
Protocol
Support Modbus and DCON Protocol	Yes
Environment
Operating temperature	-25 to 75°C
Storage temperature	-40 to 85°C
Humidity	5 to 95% RH, non-condensing

User's Manual

PIN Assignment

Internal I/O Structure

FCC Certification

Add a review

Your email address will not be published. Required fields are marked *

Overall ratings

Select Rating *

You must be signed in to review! Click here to sign in.