| Share On: | |
|---|---|
| Categories: | Modbus Data Concentrator | New Products |
| Review: | Write your review |
| Resources: |
MDC-211-WF Modbus data concentrator developed by ICP DAS, with Ethernet, WiFi Wireless, RS-232 and RS-485 communication interfaces, can link the Modbus RTU devices to the Ethernet network. MDC-211-WF can read the data of Modbus RTU device according to the user-defined command table, and integrate the data of different Modbus RTU devices into the format of the continuous address so that the remote monitor host can connect to MDC-211-WF from Ethernet to access the data of multiple Modbus RTU devices at once.
| Wi-Fi | |
| Standards | IEEE 802.11a/b/g/n |
| Protocol | Modbus TCP Slave |
| Mode | Limit-AP/Infrastructure |
| Frequency | 2.4 GHz 5 GHz |
| Encryption | Open/WEP/WPA/WPA2 |
| Channels | 2.4 GHz: CH1~11 5 GHz: CH36, 40, 44, 48 |
| Antenna | Omni-Directional 3 dBi @2.4 GHz / 5.5 dBi @ 5 GHz |
| COM Ports | |
| Ports | 1 x RS-232 1 x RS-485 |
| Baud Rate | 1200 ~ 115200 bps |
| Protocol | Modbus RTU Master/ Slave |
| Polling Definition | Up to 240 Modbus command definitions for all Wi-Fi/RS-232/ RS-485 ports |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100Base-T(X) |
| Protocol | Modbus TCP Slave |
| Configuration | Web-based User Interface |
| Power | |
| Input Range | +10 VDC ~ +30 VDC |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | 52 x 98 x 27 (W x L x H) |
| Installation | DIN-Rail |
| Environmental | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -40 ~ +85°C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *