| Share On: | |
|---|---|
| Categories: | M-7000 Modbus RTU Remote Data Acquisition Modules | M-7000 Modbus RTU Remote Data Acquisition Modules | New Products |
| Review: | Write your review |
| Resources: |
The M-7055U module provides 8 isolated channels for Digital Input and 8 isolated channels for Digital Output. Digital Input and Digital Output can be selected as either sink- or source-type via wire connection. All Digital Input channels are also able to be used as 16-bit counters. There are options to enable both power-on and safe values. The M-7055UD has 16 LED indicators that can be used to monitor the status of the Digital Input and Digital Output channels. The M-7055U(D) also provides ±8 kV ESD, ±4 kV EFT and ±2 kV surge protection, as well as 2000 VDC intra-module isolation to enhance noise protection capabilities in harsh industrial environments.
| CPU Module | |
| Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) |
| Display | |
| Type | I/O LED Indicator |
| Isolation | |
| Intra-module Isolation | 2000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power |
| ESD (IEC 61000-4-2) | ±8 kV Contact for Each Terminal ±15 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±2 kV |
| LED Indicators | |
| Status | 1 x Power and Communication |
| Digital Input/Counter | |
| Channel | 8 |
| Type | Dry Contact, Source Wet Contact, Sink/Source |
| Wet Contact, ON Voltage Level | +10 ~ 50 VDC |
| Wet Contact, OFF Voltage Level | +4 VDC Max. |
| Dry Contact, ON Voltage Level | Close to GND |
| Dry Contact, OFF Voltage Level | Open |
| Max. Counts | 65535 (16-bit) |
| Frequency | 100 Hz |
| Min. Pulse Width | 5 ms |
| Input Impedance | 10 KΩ |
| Overvoltage Protection | ±70 VDC |
| Digital Output | |
| Channels | 8 |
| Type | Push-Pull |
| Sink/Source (NPN/PNP) | Sink/Source |
| Load Voltage | +3.5 ~ 80 VDC |
| Max. Load Current | 500 mA/Channel |
| Power on Value | Yes |
| Safe Value | Yes |
| COM Ports | |
| Ports | 1 x RS-485 |
| Baud Rate | 1200 ~ 115200 bps |
| Data Format | (N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1) |
| Protocol | Modbus RTU, DCON |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 0.9W Max |
| Input Range | 10 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 123 x 72 x 35 (W x L x H) |
| Installation | DIN-Rail |
| Environmental | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -40 ~ +85°C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
Quick Start
Add a review
Your email address will not be published. Required fields are marked *