ISO-730

The ISO-730 has officially been phased out and will no longer be available. It has now been replaced by PISO-730U.

The ISO-730 has 32 of optically isolated digital I/O and 32 TTL logic I/O channels. Each of the 16 isolated digital input channels accept voltage from 5V to 24Vdc and have a resistance of 1.2KΩ. Every eight input channels use one external common ground. Channels 0-7 use EI.COM1 and channels 8-15 use EI-COM2. Each of the 16 isolated digital output channels equipped a darlington transistor. Every eight output channels use the common emitters. The power supply of the output port should use the external power. The channels 0-7 use EO-COM1 and channel 8-15 use EO-COM2. This interface board is easy installed in any PC/AT/XT compatible computer. The board interfaces to field logic signals, which eliminates ground loop problems and isolates the host computer from damaging voltages. The ISO-730 has one 37-pin D-sub connector and four 20-pin headers. It is fully compatible to the PCL-730.

• 16-channels of optically isolated digital input
• 16-chanes of l optically isolated open-collector output
• 16-channels TTL level digital input (Non-isolation)
• 16-channels TTL level digital output (Non-isolation)
• DC/DC converter build-in
• One 37-pin D-sub connector and Two seperate 20-pin header for isolated I/O
• Two 20-pin header for TTL digital I/O (Non-isolatiton)
• 2500Vdc isolation voltage
• Interrupt handling
• Interrupt sources: channel 0 and channel 16
• Software:
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000/XP
  • Toolkit for Labview 95/98
  • Toolkit for Labview NT
  • Toolkit for Labview 2000/XP
  • Toolkit for DasyLab
• Applications:
  • Factory Automation
  • Product Test
  • Laboratory Automation