| Share On: | |
|---|---|
| Categories: | New Products | Motion, Temperature and Leak Detection Sensors | MQTT Data Acquisition |
| Review: | Write your review |
| Resources: |
The iSN-201 series modules can be used for measuring indoor illumination, temperature and humidity. A wide range of interface connections can be selected to suit individual needs, including RS-485/Ethernet/ Bluetooth/ Wi-Fi models. The various models provide support for the DCON and Modbus RTU/TCP protocols, and can be easily integrated into existing HMI/SCADA/ central control systems.
The screw-free quick-connect connector and the DIP and rotary switches make the modules easy to install, repair, and maintain. The white minimalist exterior design ensures that it easy to match with interior decoration.
The WISE-5231 and electric curtain combination with the illumination meter iSN-201-E can easily be setup through a simple web interface and logic control. The two-way interlocking mode integrates the electric curtains and the Building Management System (BMS), and collects environmental sensing data simultaneously. When detecting the indoor temperature or humidity rises or the intensity of sunshine is strong, it will automatically activate the pulling motion of the electric curtain, or enable a personalized scenario to control all curtains or specifi c curtain combinations in the home environment. In addition, the user can edit the scenario and set up the curtain automation at scheduled times.
Illuminance Measurement
Range
0 to 20,000 Lux
Resolution
1 Lux
Accuracy
± 5%
Temperature Measurement
Measurement Range
-40 to +120°C
Fire Alarm
65°C (Programmable)
Resolution
0.1°C
Accuracy
Typical: ± 0.5°C; refer to figure 2
Relative Humidity Measurement
Range
0 to 100% RH
Resolution
0.1% RH
Accuracy
Typical: ± 3% RH @ 20 ~ 80% RH; refer to figure 1
Relay Output
Channels
1
Type
Power Relay, Form C
Max. Load Current
NO: 10 A @ 250 VAC
NC: 6 A @ 250 VAC
Load Wattage
Incandescent Bulb: 1500 W Max.; Fluorescent Lamp: 300 W Max.
Communication
Node Address
Hardware: 96 to 127 / Software: 1 to 255
Protocol
DCON, Modbus RTU, Modbus TCP, MQTT
Wired Interface
Yes, RS-485 X 1 and Ethernet/PoE x1
Wireless Interface
-
Supported Standard
-
Wireless Mode
-
Wireless Security
-
Transmission Range
-
LED Indicators
LED Indicators
Yes,1 as Power, 1 as Alarm Indicator. 1 as Communication Indicator.
EMS Protection
ESD (IEC 61000-4-2)
± 4 kV Contact for each Terminal, ± 8 kV Air for Random Point
EFT (IEC 61000-4-4)
± 4 kV for Power Line
Power Requirements
Power Supply
10 to 48 VDC, PoE
Reverse Polarity Protection
Yes
Power Consumption
2 W
Mechanical
Installation
Ceiling/surface mounted
Protection Class
IP20
Dimensions (D x H)
O 150 mm x 53 mm
Environment
Operating Temperature
0 to +75°C
Storage Temperature
-30 to +80°C
Humidity
10 to 90% RH, Non-condensing
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
User Manual
DCON Utility Pro
Add a review
Your email address will not be published. Required fields are marked *