| Share On: | |
|---|---|
| Categories: | I-97K series I/O modules |
| Review: | Write your review |
| Resources: |
The I-97024U is a source type analog output module, equipped with 4 single-ended analog output channels. Every channel can be programmed to an individual output range of 0 ~ 5 V, ±5 V, 0 ~ 10 V, ±10 V, +4 ~ +20 mA or 0 ~ +20 mA. Open wire detection is provided for +4 ~ +20 mA output. Options for configuring power-on and safe values are also included.
Communication
Interface
RS-485
Format
N, 8, 1
Baud Rate
1200 to 115200 bps
Protocol
DCON
Dual Watchdog
Yes, Module (1.6 Seconds), Communication (Programmable)
LED Display
System LED Indictor
Yes, 1 as Power
I/O LED Indicator
8 LEDs as Analog Output Fault Indications
Isolation
Intra-module Isolation, Field-to-Logic
3000 VDC
EMS Protection
ESD (IEC 61000-4-2)
±4 kV Contact for each Terminal
±8 kV Air for Random Point
RS Immunity (IEC 61000-4-3)
3 V/m, 80 MHz ~ 1 GHz
Power
Power Consumption
0.3 W Max.
Mechanical
Dimensions (L x W x H)
144 mm x 30.3 mm x 134 mm
Environment
Operating Temperature
-25°C ~ +75°C
Storage Temperature
-40°C ~ +85°C
Humidity
10 ~ 90% RH, non-condensing
Analog Input
Channels
4
Current Output Wiring
Source
Range
0 ~ +5 VDC, ±5 VDC, 0 ~ +10 VDC, ±10 VDC, 0 ~ +20 mA, +4 ~ +20 mA
Resolution
16-bit
Accuracy
±0.02% of FSR
Zero Drift
±0.2 μV/°C
Span Drift
±25 ppm/°C
DA Output Response Time
10 ms per channel
Programmable Output Slope
Voltage
0.0625 ~ 512 V/Second
Current
T0.125 ~ 1024 mA/Second
Output Capacity
1000 Ω
Open Wire Detection
Yes, +4 ~ +20 mA
Short Circuit Protection
Yes
Power-on Value
Yes
Safe Value
Yes
External Power Requirements
Reverse Polarity Protection
Yes
Powered from Terminal Block
Yes, 15 ~ 30 VDC
Consumption
4 W
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *