| Share On: | |
|---|---|
| Categories: | I-87KW High Performance I/O Modules |
| Review: | Write your review |
| Resources: |
I-87040W has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinPAC, XPAC, and ViewPAC controllers. I-87040W is an Isolated Digital Input Module with 32 channels. Its input type is Isolated digital input. I-87040 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility.
| CPU Module | |
|---|---|
| Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) |
| Isolation | |
|---|---|
| Intra-module Isolation | 3750 VDC |
| EMS Protection | |
|---|---|
| ESD (IEC 61000-4-2) | ± 4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| LED Indicators | |
|---|---|
| Status | 1 x Power and Communication 32 x I/O |
| Digital Input | |
|---|---|
| Low Pass Filter | Yes |
| Digital Input/Counter | |
|---|---|
| Channels | 32 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink, Source |
| ON Voltage Level | +3.5 VDC ~ +30 VDC |
| OFF Voltage Level | +1 VDC Max. |
| Max. Counts | 16-bit (65535) |
| Frequency | 100 Hz |
| Min. Pulse Width | 5 ms |
| Input Impedance | 4.7 k, 0.25 W |
| Overvoltage Protection | 35 VDC |
| COM Ports | |
|---|---|
| Ports | 1 x RS-485 |
| Baud Rate | 1200 ~ 115200 bps |
| Data Format | N, 8, 1 |
| Protocol | DCON |
| Power | |
|---|---|
| Consumption | 1.6 W Max. |
| Mechanical | |
|---|---|
| Dimensions (mm) | 30 x 85 x 115 (W x L x H) |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
Add a review
Your email address will not be published. Required fields are marked *