| Share On: | |
|---|---|
| Categories: | New Products | Industrial GPS Receivers |
| Review: | Write your review |
| Resources: |
The GPS-721U-MRTU, a new GPS solution for Remote GPS Receiver module in ICP DAS, featuring high sensitivity, low power consumption and ultra small form factor with DCON, Modbus RTU and GPS protocols. This powerful item provides you with superior sensitivity and outstanding performance even in the harshest environment.The GPS-721U-MRTU provides extra 1 channel DO and 1 channel PPS for users PPS signals can be used for precise timekeeping and time measurement. One can combine the PPS functionality with another as time synchronization source. Therefore, the GPS-721U-MRTU can be a powerful GPS remote module as well as a general purpose GPS module with RS232 interface. It can also be applied in Automotive navigation, Personal positioning and navigation, Marine navigation, Satellite time correction and etc…
| LED Indicators | |
| Status | 1 x Power/Communication 3 x GPS |
| GPS | |
| Acquisition Time | Cold Start (Open Sky) = 29 s (typical) |
| Chip | u-Blox solution |
| Frequency | L1 1575.42 MHz, C/A code |
| Max. Altitude | <50,000 m |
| Max. Velocity | <500 m/s |
| Position Accuracy | Autonomous: 2.5 m SBAS: 2.0 m |
| Protocol | NMEA 0183 (Baudrate 9600 bps) |
| Sensitivity | Tracking: Up to -161 dBm Cold start: Up to -148 dBm |
| Support Channels | 56 |
| 1 PPS | Pulse per second output (Default 100 ms pulse/sec) |
| Digital Output | |
| Channels | 1 (Sink) |
| Type | Non-isolated Open Collector |
| Load Voltage | +5 VDC +30 VDC |
| Max. Load Current | 100 mA |
| COM Ports | |
| Ports | 1 x RS-232 (GPS information output) |
| Power | |
| Input Range | +10 VDC +30 VDC (Non-regulated) |
| Consumption | 2.5 W |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 72 x 117 x 35 (W x L x D) |
| Weight | 200 g |
| Environmental | |
| Operating Temperature | -25 +75°C |
| Storage Temperature | -40 +85°C |
| Humidity | 5 95% RH, Non-condensing |
Our mission is to provide the absolute best customer experience in industrial automation and electronics, without exception.
Subscribe to our mailing list today and join thousands of others who want to stay up-to-date with the latest news in data acquisition and industrial data communication.
ICP DAS USA is a leading manufacturer of industrial data acquisition, data communication, programmable controllers, wireless and software solutions.
Quick Start
Add a review
Your email address will not be published. Required fields are marked *