FREE $30.00 Visa Gift Card with CODE: VISA for registered customer's FIRST-TIME purchase.

Cage/NCage Code 3FNF0

Orders ship within a week!

  • Connect with us on LinkedIn Subscribe to our YouTube channel Follow us on Twitter Follow us on Facebook Follow us on Instagram

Why does the tGW-715i reboot or lose communication intermittently?

Intermittent communication loss can originate from the power supply, Ethernet network, serial wiring, communication timeouts, or watchdog settings.

The tGW-715i supports IEEE 802.3af Class 1 PoE and a 12-48 VDC supply. Verify that the power source is suitable for the module and that connections are secure.

 

Recommended Troubleshooting Procedure

  1. Check that the power source is stable and within the module’s specified range.
  2. If using PoE, confirm that the switch or injector provides compatible IEEE 802.3af power.
  3. Inspect the Ethernet cable, switch port, connectors, and network configuration.
  4. Check whether the failure affects Ethernet, serial communication, or both.
  5. Review the System Timeout/Network Watchdog configuration if reboots occur after periods of inactivity.
  6. Check Port1 timeout settings if the gateway loses communication with a slow serial device.
  7. Record the firmware version and the settings in use before making significant changes.

If the module repeatedly reboots, test the power source and network conditions before resetting or replacing the device.

A factory reset should not be the first response to an intermittent fault because it also removes the existing configuration.

Troubleshooting Tip: Keep a record of the time of each failure, active masters, error codes, and whether the failure occurs during idle periods or heavy polling. This information helps isolate the cause.

Tags
Social Share
    The current post does not belong to any category.
    No categories found
Enable Notifications OK No thanks