DIO-96

$0.00

96-Bit OPTO-22 DIO Board. Phased out and replaced by PIO-D96U(PCI)/PEX-D96S (PCI Express)

Product Unavailable

Share On:
Categories:	ISA Digital I/O Boards \| ISA Digital I/O
Review:	Write your review
Resources:	User's Manual Quick Start PIN Assignment Software CE Certification

The DIO-96 has officially been phased out and will no longer be available. It has now been replaced by PIO-D96U and PEX-D96S.

The DIO-144/96 provides 144/96 TTL digital I/O lines. The DIO-144/96 emulates 8255 mode 0 and has an increased output current of 15 mA (source) and 64 mA (sink) , allowing it to control LED, relay, etc. The DIO-144/96 consists of eighteen 8 bit bi-directional ports and 2 input lines for interrupt enable and interrupt. The 8 bit ports are named port A(PA),port B(PB) and port C(PC). The port C can be split into two four bit. All port are configured as inputs upon power-up or reset. The DIO-144/96 uses 4 consecutive I/O locations in I/O addressing space. The base address is selectable from 200 to 3FF hex. The interrupt signal can be connected to any of the interrupt levels 2 through 15.

Double side SMT , short card, power saving
DIO-144 : 144 digital I/O lines
DIO-96 : 96 digital I/O lines
Emulate 8255 mode 0 (Basic Input / Output mode)
Buffer output for higher driving capability than 8255
Register compatible to 722 series
Programmable interrupt handling
DIO-144 : Six 50-pin Header
DIO-96 : Four 50-pin Header
Output status readback

Applications

Factory automation
Product test
Test automation
Digital I/O control
Alarm monitoring
4-channel SSR Output Daughter Board

Software

DOS sample program(with source codes)
DLL and OCX SDK for Windows 98/NT/2000
DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7
VB/VC/Delphi/BCB sample programs with source codes are included
LabVIEW toolkit for Windows
Driver for Linux and DasyLab

Specifications

Model Name	DIO-96	DIO-144
Digital Input
Channels	96 (OPTO-22 compatible)	144 (OPTO-22 compatible)
Compatibility	5 V/TTL
Input Voltage	Logic 0: 0.8 V max. Logic 1: 2.0 V min.
Response Speed	1.0 MHz (Typical)
Digital Output
Channels	96 (OPTO-22 compatible)	144 (OPTO-22 compatible)
Compatibility	5 V/TTL
Output Voltage	Logic 0: 0.4 V max. Logic 1: 2.4 V min.
Output Capability	Sink: 0.8 mA @ 0.8 V Source: -2.4 mA @ 2.0 V
Response Speed	1.0 MHz (Typical)
General
Bus Type	ISA
I/O Connector	50-pin box header x 4	50-pin box header x 6
Dimensions (L x W x D)	182 mm x 120 mm x 22 mm
Power Consumption	800 mA @ +5 V	700 mA @ +5 V
Operating Temperature	0 ~ 60 °C
Storage Temperature	-20 ~ 70 °C
Humidity	5 ~ 85% RH, non-condensing

Add a review

Your email address will not be published. Required fields are marked *

Overall ratings

Select Rating *

You must be signed in to review! Click here to sign in.