A pair-connection can carry serial Modbus communications over an Ethernet or routed TCP/IP connection. This is useful when two serial devices must exchange Modbus messages but are too far apart for a direct serial cable.
You generally need two compatible gateways, one at each location.
The Client gateway initiates the TCP connection.
The serial settings at each end should match the device attached to that particular gateway; they do not necessarily have to be identical at both locations.
The manual includes examples of pair-connections using different baud rates and serial interfaces.
Troubleshooting Tip: Verify IP connectivity between the gateways, TCP port access through any firewalls, correct Client/Server roles, and serial wiring at both ends. A functioning Ethernet link alone does not guarantee that the remote serial devices are communicating correctly.