DHCP allows the gateway to obtain its IPv4 network settings automatically from a DHCP server. This is useful when your network administrator manages addresses centrally.
To configure DHCP:
1. Open the module’s web interface.
2. Navigate to the Network page.
3. Select DHCP under the IPv4 address-type setting.
4. Click Update Settings.
5. Allow the module to obtain its address from the DHCP server.
To identify the assigned address, use the ICP DAS eSearch utility on the local network or check the DHCP lease table on your network’s DHCP server.
If you cannot find the module, verify that it has power, that the Ethernet connection is active, and that your PC and gateway are connected to the appropriate network. Discovery broadcasts may not cross routers between separate subnets.
Important: Record the assigned IP address or arrange a DHCP reservation so your control system can consistently communicate with the gateway.