FREE $30.00 Visa Gift Card with CODE: VISA for registered customer's FIRST-TIME purchase.

Cage/NCage Code 3FNF0

Orders ship within a week!

  • Connect with us on LinkedIn Subscribe to our YouTube channel Follow us on Twitter Follow us on Facebook Follow us on Instagram

How do I assign a static IP address to the tGW-715i?

A static IP address is often preferred for industrial equipment because PLCs, HMIs, and SCADA systems need a predictable address for communication.

1. Connect to the tGW-715i’s web configuration interface.
2. Open the Network page.
3. Select the static IPv4 address option under the address-type settings.
4. Enter an unused IP address, subnet mask, and default gateway appropriate for your network.
5. Confirm the values with your network administrator if the gateway is being installed on a managed
plant network.
6. Click Update Settings to save the network configuration.
7. Reconnect to the module using its new IP address.

Make sure the selected IP address is unique and belongs to the correct subnet. An incorrect subnet mask or gateway can prevent communication with masters on other networks.

Troubleshooting tip: If the web interface becomes unreachable after changing the IP address, verify the PC’s network settings and reconnect using the new address. Use eSearch to rediscover the module on the local network if necessary.

Tags
Social Share
    The current post does not belong to any category.
    No categories found
Enable Notifications OK No thanks